20 December 2023 in Journal of Lightwave Technology
The ongoing growth of data traffic from existing and new latency-sensitive applications poses a challenge to the data center network. Wavelength-routed optical circuit switching promises high bandwidth, low power and latency networking for data centers, but requires a wideband wavelength tunable source capable of nanosecond-scale hitless wavelength switching at every node. A tunable source based on DFB laser arrays is a potential candidate due to the high-speed dynamic property and high single-longitudinal-mode (SLM) stability of the DFB laser. However, the large-scale integration of the DFB laser and the high precision control of the lasing wavelength are still problems. In this work, we proposed and fabricated a monolithic integrated 16-channel DFB laser array with high SLM stability and 100-GHz channel spacing by using the reconstruction-equivalent-chirp (REC) technique. The maximum output power of each channel was above 6 mW. Based on the custom-designed fast switching drive board with a field-programmable gate array (FPGA), the switch-ON and OFF time between any pair of channel combinations were measured at less than 10 ns. Dynamic switching wavelengths remained stable and resided within the receiver bandwidth. Wavelength switching experiments for modulated light signals were done by driving the external modulator, achieving bit error performance at 1×10 -9 for 10 Gb/s NRZ data.
5 February 2025 in Journal of Lightwave Technology
A 16-channel electroabsorption modulated tunable multi-wavelength DFB laser array is proposed and experimentally demonstrated. The sixteen DFB lasers, each with a wavelength spacing of 100 GHz, are arranged in a 4 × 4 matrix. The wavelengths are designed using an interleaving scheme to reduce grating crosstalk. The grating is designed and fabricated using the reconstruction equivalent chirp (REC) technique to simplify the grating fabrication and ensure precise wavelength control. The electroabsorption modulator and the tunable multi-wavelength laser array share the same active layer to reduce fabrication complexity and costs. Wavelength tuning is achieved by selecting the active laser without altering the thermoelectric cooler (TEC). Consequently, 16 channels with 100 GHz spacing are obtained, each operating in good single-mode properties with SMSRs of above 45 dB. The average wavelength spacing is 106.1 GHz, and only 6.1 GHz deviated from the design. The semiconductor optical amplifier (SOA) is integrated to compensate for the frequency chirp and amplify the output power, thus enabling long-distance transmission. The output power is amplified to over 18 mW with a 150 mA current injected into the SOA. The 3-dB bandwidth of the EAM exceeds 20 GHz, producing clear 25 Gb/s back-to-back eye diagrams with mask margins over 40% for the 16 channels. With the assistance of the chirp compensation by the SOA, the eye diagrams of the 16 channels remain clear after 10 km of transmission. Due to the superior performance, the proposed device is promising for use in DWDM systems, particularly in applications requiring fast channel switching, such as optical packet switching and NG-PON2 technology.
12 August 2024 in Journal of Lightwave Technology
Optical switching based on arrayed waveguide grating routers (AWGRs) and fast tunable sources is a future-proof solution to overcome the bottleneck of limited bandwidth and high latency of electrical switches-based data center networks (DCNs). To support fine-grained optical packet switching and maintain high network throughputs, tunable sources capable of nanosecond-scale hitless wavelength switching are critical requirements for such fast optically switching networks. In this work, we experimentally demonstrate a fast-tunable source based on a high-density multi-wavelength DFB laser array monolithically integrated with a three-stage Y-branch combiner and an SOA. The DFB laser array has an average 100-GHz channel spacing under the same bias current. The output power of all lasers is above 10 mW, with a uniformity of less than 1 dB. Benefitting from the high-speed dynamic property of the DFB laser and high-speed burst drive pulses controlled by a field-programmable gate array (FPGA), less than 3 ns switching time is achieved by the on-off switching of the DFB laser on arrays, which is independent of tuning range. Furthermore, a 2 × 2 optical switching prototype based on this demonstrated chip and AWGRs achieves error-free transmission atop 25 Gbps NRZ per link with 12.8 ns end-to-end reconfiguration, which provides a path toward a high-bandwidth, low-latency, and energy-efficient wavelength-switched network for data centers in the post-Moore's Law era.