2 October 2012 in Optics Express
We demonstrate amorphous and polycrystalline anatase TiO2 thin films and submicrometer-wide waveguides with promising optical properties for microphotonic devices. We deposit both amorphous and polycrystalline anatase TiO2 using reactive sputtering and define waveguides using electron-beam lithography and reactive ion etching. For the amorphous TiO2, we obtain propagation losses of 0.12 ± 0.02 dB/mm at 633 nm and 0.04 ± 0.01 dB/mm at 1550 nm in thin films and 2.6 ± 0.5 dB/mm at 633 nm and 0.4 ± 0.2 dB/mm at 1550 nm in waveguides. Using single-mode amorphous TiO2 waveguides, we characterize microphotonic features including microbends and optical couplers. We show transmission of 780-nm light through microbends having radii down to 2 μm and variable signal splitting in microphotonic couplers with coupling lengths of 10 μm.
8 February 2012 in Optics Letters
We demonstrate waveguide-coupled titanium dioxide () racetrack resonators with loaded quality factors of for the visible wavelengths. The structures were fabricated in sputtered thin films on oxidized silicon substrates using standard top-down nanofabrication techniques, and passively probed in transmission measurements using a tunable red laser.
21 April 2015 in Optics Express
We present a bi-layer lift-off fabrication approach to create low-loss amorphous titanium dioxide (TiO2) integrated optical waveguides and resonators for visible and near-infrared applications. This approach achieves single-mode waveguide losses as low as 7.5 dB/cm around 633 nm and 1.2 dB/cm around 1550 nm, a factor of 4 improvement over previous reports, without the need to optimize etching conditions. Depositing a secondary 260-nm TiO2 layer can reduce losses further, with the optimized process yielding micro-ring resonators with loaded quality factors as high as 1.5 × 105 around 1550 nm and 1.6×105 around 780 nm. These losses render our TiO2 devices suitable for visible and telecommunications applications; in addition, the simplicity of this lift-off approach is broadly applicable to other novel material platforms, particularly using near-visible wavelengths.
26 July 2013 in Optics Express
We observe spectral broadening of femtosecond pulses in single-mode anatase-titanium dioxide (TiO2) waveguides at telecommunication and near-visible wavelengths (1565 and 794 nm). By fitting our data to nonlinear pulse propagation simulations, we quantify nonlinear optical parameters around 1565 nm. Our fitting yields a nonlinear refractive index of 0.16 × 10−18 m2/W, no two-photon absorption, and stimulated Raman scattering from the 144 cm−1 Raman line of anatase with a gain coefficient of 6.6 × 10−12 m/W. Additionally, we report on asymmetric spectral broadening around 794 nm. The wide wavelength applicability and negligible two-photon absorption of TiO2 make it a promising material for integrated photonics.
25 January 2012 in Optics Express
EMErwin A. Martí-Panameño
We observe mixed two- and three-photon absorption in bulk rutile (TiO2) around 800 nm using the open aperture Z-scan technique. We fit the data with an extended model that includes multiphoton absorption, beam quality, and ellipticity. The extracted two- and three-photon absorption coefficients are below 1 mm/GW and 2 mm3/GW2, respectively. We observe negligible two-photon absorption for 813-nm light polarized along the extraordinary axis. We measure the nonlinear index of refraction and obtain two-photon nonlinear figures of merit greater than 1.1 at 774 nm and greater than 12 at 813 nm. Similarly, we obtain three-photon figures of merit that allow operational intensities up to 0.57 GW/mm2. We conclude that rutile is a promising material for all-optical switching applications around 800 nm.
18 March 2015 in Optics Express
Third-harmonic generation (THG) has applications ranging from wavelength conversion to pulse characterization, and has important implications for quantum sources of entangled photons. However, on-chip THG devices are nearly unexplored because bulk techniques are difficult to adapt to integrated photonic circuits. Using sub-micrometer-wide polycrystalline anatase TiO2 waveguides, we demonstrate third-harmonic generation on a CMOS-compatible platform. We correlate higher conversion efficiencies with phase-matching between the fundamental pump mode and higher-order signal modes. Using scattered light, we estimate conversion efficiencies as high as 2.5% using femtosecond pulses, and thus demonstrate that multimode TiO2 waveguides are promising for wideband wavelength conversion and new applications ranging from sensors to triplet-photon sources.