1 January 2018 in International Journal of Heat and Mass Transfer
25 November 2015 in Journal of Thermal Spray Technology
23 February 2016 in IOP Conference Series: Materials Science and Engineering
In the present work, we propose a new method for measuring the distribution of temperature in the ensembles of condensed-phase particles in plasma spray flows. Interrelation between the spectral temperature of the particles and the distribution of camera brightness signal is revealed. The established inter-relation enables an in-situ calibration of measuring instruments using the objects under study. The spectral-brightness pyrometry method was approbated on a Plazer plasma-arc wire spraying facility at the Paton Institute of Electrical Welding (Ukrainian Academy of Sciences, Kiev) and on the Thermoplasma 50-1 powder spraying facility at the Institute of Theoretical and Applied Mechanics (Russian Academy of Sciences, Siberian Branch, Novosibirsk). The work was supported by the Russian Foundation for Basic Research (Grants Nos. 14-08-90428 and 15-48-00100).
1 January 2017 in Thermophysics and Aeromechanics
The paper presents the experimental results for velocity and tempertaure disibutions of the condensed phase in a plasma jet from the plasmatorch PNK-50 (design from ITAM SB RAS, Novosibirsk). The plasma jet is used at different operational modes for thermal spraying of nickel alloy powder PR-NKh16SR3. The measurements for average velocity (230–280 m/s) and temperature (2290–2410 K) of sprayed particles were matched to data on microhardness (630–710 HV) and porosity (1.7–13.5 %) of samples. Results were transferred into coating properties maps plotted in coordinates “arc current vs. torch offset” and “particle velocity vs. particle temperature”. Experiments demonstrated the change in parameters of condensed phase in the jet after performimg of maintenance job for the plasmatorch. We propose the method for adjusting the operational parameters of thermal spraying equipment using optical methods of control for particle velocity and particle temperature. The exemplary apparatus function of the plasmatorch was plotted; an approach is proposed for optimization and transfer of spraying technology of coatings with specified properties between equipment from different manufacturers, different class and power.
23 April 2015 in IOP Conference Series: Materials Science and Engineering
26 November 2018 in Journal of Physics: Conference Series
The possibilities of using the optical diagnostic complex «Yuna» for studying the characteristics of a disperse phase gas-powder jets under conditions of thermal spraying, laser cladding, as well as modeling physical experiments with cold gas-powder jets are presented. The optical system allows measurements of particles larger than 10 μm, the measureable velocities range is 1-1000 m/s, measureable temperature range is 1500-5000 K, and the field of view size can vary from 1 to 20 cm. The particle velocity measurements are performed using the Particle Track Velocimetry (PTV) method, and temperature measurements-using the Spectral-Brightness Pyrometry (SBP) method. For diagnostics of gas-powder flows with cold particles, a pulsed LED illumination system is used. Various examples of the application of the diagnostic system for investigation of hot and cold gas-powder flows are presented.