1 June 2010 in Journal of Applied Oral Science
FMFabrício Mariano Mundim
LGLucas da Fonseca Roberti Garcia
Lucas da Fonseca Roberti Garcia
The purpose of this study was to assess the color change of three types of composite resins exposed to coffee and cola drink, and the effect of repolishing on the color stability of these composites after staining. Fifteen specimens (15 mm diameter and 2 mm thick) were fabricated from microhybrid (Esthet-X; Dentsply and Filtek Z-250; 3M ESPE) and high-density hybrid (Surefil; Dentsply) composites, and were finished and polished with aluminum oxide discs (Sof-Lex; 3M ESPE). Color of the specimens was measured according to the CIE L*a*b* system in a reflection spectrophotometer (PCB 6807; BYK Gardner). After baseline color measurements, 5 specimens of each resin were immersed in different staining solutions for 15 days: G1 - distilled water (control), G2 - coffee, G3 - cola soft drink. Afterwards, new color measurement was performed and the specimens were repolished and submitted to new color reading. Color stability was determined by the difference (∆) between the coordinates L*, a*, and b* obtained from the specimens before and after immersion into the solutions and after repolishing. There was no statistically significant difference (ANOVA, Tukey's test; p>0.05) among the ∆ values for the different types of composites after staining or repolishing. For all composite resins, coffee promoted more color change (∆>3.3) than distilled water and the cola soft drink. After repolishing, the ∆ values of the specimens immersed in coffee decreased to clinically acceptable values (∆<3.3), but remained significantly higher than those of the other groups. No significant difference was found among composite resins or between color values before and after repolishing of specimens immersed in distilled water and cola. Immersing specimens in coffee caused greater color change in all types of composite resins tested in this study and repolishing contributed to decrease staining to clinically acceptable ∆ values.
20 August 2008 in Gerodontology
1 July 2011 in Journal of Dentistry
FMFabrício Mariano Mundim
LGLucas da Fonseca Roberti Garcia
Lucas da Fonseca Roberti Garcia
DCDiogo Rodrigues Cruvinel
1 April 2012 in Journal of Applied Oral Science
MFMarília Salomão Campos Cabrini Festuccia
Marília Salomão Campos Cabrini Festuccia
LGLucas da Fonseca Roberti Garcia
Lucas da Fonseca Roberti Garcia
DCDiogo Rodrigues Cruvinel
The purpose of this study was to evaluate the effect of mouth rinse solutions on color stability, surface roughness and microhardness of two composite resins. Fifty test specimens of each composite (Filtek Z250 and Z350; 3M ESPE) were made using a teflon matrix (12x2 mm). Color, surface roughness and Knoop microhardness baseline measurements of each specimen were made and specimens (n=10) were immersed in 5 mouth rinse solutions: G1: distilled water (control), G2: Plax Classic, G3: Plax alcohol-free; G4: Periogard, and G5: Listerine. Final measurements of color, roughness and microhardness were performed and the results submitted to statistical analysis (2-way ANOVA, Bonferroni's test; p0.05). With regard to roughness, both composites showed significant changes when immersed in Listerine in comparison with Plax alcohol-free (p<0.05). Microhardness of Z350 was shown to be significantly changed when the composite was immersed in Plax alcohol-free (p<0.05). Composite changes depended on the material itself rather than the mouth rinse solution used.
1 August 2013 in Journal of Dentistry
1 January 2009 in The Journal of Prosthetic Dentistry
LCLuciana Assirati Casemiro
Luciana Assirati Casemiro
LGLucas da Fonseca Roberti Garcia
Lucas da Fonseca Roberti Garcia
DCDiogo Rodrigues Cruvinel