For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D–T mixtures since 1997 and the first ever D–T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D–T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D–T preparation. This intense preparation includes the review of the physics basis for the D–T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D–T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfvèn eigenmode antennas, neutral gauges, radiation hard imaging systems…) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D–T campaign provides an incomparable source of information and a basis for the future D–T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
Low-rank approximation techniques are useful approaches to reduce the computational effort required by integral equations methods. Here, two different libraries based on hierarchical-matrices and hierarchically semi-separable matrices are applied to the partial element equivalent circuit method for the study of high-frequency electromagnetic problems. The academic case of a dielectric sphere and the study of a complex device used in thermonuclear fusion science are considered in order to compare the performances of the two libraries.
A novel partial element equivalent circuit (PEEC) formulation for solving full-Maxwell's equations, with piecewise homogeneous and linear conductive, dielectric, and magnetic media, is presented. It is based on the cell method which by using integral variables as problem unknowns is naturally suited for developing circuit-like approaches such as PEEC. Volume meshing allows complex 3-D geometries, with electric and magnetic materials, to be discretized. Electromagnetic couplings in the air domain are modeled by integral equations.
Tokamak plasmas can amplify very small resonant components of error fields (EFs) when operating close to the ideal magneto-hydrodynamic (MHD) limits. Such EFs are well diagnosed in ASDEX Upgrade tokamak (Igochine V et al 2017 Nucl. Fusion 57 116027, Maraschek M et al 40th EPS Conf. on Plasma Physics 2013 P4.127), which allows to model EF as well as the correction required for the optimal compensation. Experiments on ASDEX Upgrade show that EF correction considering the plasma effect, as it is foreseen for ITER, is necessary even in the case of small resonant EF. Such correction improves the achievable by 10% and makes discharges more stable with respect to ideal modes.