Murat Guler

Murat Guler

Auto-generated profile, based on publicly available information

Murat Guler

Middle East Technical University

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2010 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
ECErdem Coleri
Erdem Coleri
MGMurat Guler
Murat Guler
AGA. Gurkan Gungor
A. Gurkan Gungor
JHJohn T. Harvey
John T. Harvey
This paper demonstrates the applicability of the genetic algorithm and curve-shifting methodology to the estimation of the resilient modulus at various stress states for subgrade soils by using the results of triaxial resilient modulus tests. This innovative methodology is proposed as an alternative to conventional nonlinear constitutive relationships. With the genetic algorithm, laboratory curves for different deviator stress levels at different confining pressures are horizontally shifted to form a final gamma distribution curve that can represent the stress–strain behavior of subgrade soils with the corresponding predicted shift factors. Resilient modulus values for a given stress state can be estimated on the basis of this curve and another gamma function that represents the variation of the shift values for different confining stresses. To compare the effectiveness of these two approaches, coefficients for the Uzan constitutive model were also determined for each laboratory test and compared with those determined by the approach described in this paper. Predicted resilient modulus values from each approach are separately compared with artificial neural network (ANN) model predictions to evaluate their efficiency and reliability for resilient response prediction. The results of the analysis indicated that the curve-shifting methodology gave superior estimates and a coefficient of determination 14% higher than the Uzan model predictions when the results were evaluated with the ANN model outputs. Thus, although it is not a constitutive model, use of the genetic algorithm and curve-shifting methodology is proposed as a promising technique for the evaluation of the stress–strain dependency of subgrade soils.

25 November 2020 in Image Analysis and Stereology
Verified
Journal Article
Open access
PDF file
MOMurat Ozen
Murat Ozen
MGMurat Guler
Murat Guler
Segregation is one of the quality standards that must be monitored during the fabrication and placement of Portland cement concrete. Segregation refers to separation of coarse aggregate from the cement paste, resulting in inhomogeneous mixture. This study introduces a digital imaging based technique to quantify the segregation of Portland cement concrete from 2D digital images of cut sections. In the previous studies, segregation was evaluated based on the existence of coarse aggregate fraction at different geometrical regions of a sample cross section without considering its distribution characteristics. However, it is shown that almost all particle fractions can form clusters and increase the degree of segregation, thus deteriorating the structural performance of concrete. In the proposed methodology, a segregation index is developed by based on the spatial distribution of different size fractions of coarse aggregate within a sample cross section. It is shown that degradation in mixture’s homogeneity is controlled by the combined effect of particle distribution and their relative proportions in the mixture. Hence, a segregation index characterizing the mixture inhomogeneity is developed by considering not only spatial distribution of aggregate particles, but also their size fractions in the mixture. The proposed methodology can be successfully used as a quality control tool for monitoring the segregation level in hardened concrete samples.

13 November 2026 in Materials Research Express
Verified
Journal Article
Open access
YKYalcin Karakaya
Yalcin Karakaya
MGMurat Guler
Murat Guler
This study introduces an image-based finite element (FE) specimen replication framework to quantify the impact of microstructural arrangement on the variability of asphalt concrete response. The method integrates vectorised, image-derived geometry reconstruction, two-phase FE modelling, and controlled numerical redistribution of aggregate particles. High-resolution scanned specimen images were processed to extract aggregate boundaries and generate explicit aggregate–matrix geometries. Coarse aggregates were modelled as linear elastic inclusions, while the surrounding binder–mastic matrix was represented using linear viscoelastic Prony series parameters based on the generalised Maxwell model and obtained from dynamic shear rheometer measurements. Synthetic specimens were generated by randomly redistributing aggregate particles while preserving their original shapes and overall gradation, allowing the effect of microstructural arrangement to be isolated under controlled numerical conditions. The framework was evaluated using resilient modulus and repeated creep tests for two asphalt mixtures with different aggregate and binder systems. The simulations closely reproduced the average resilient modulus response and captured the general trend of repeated creep deformation, particularly during the early and intermediate loading stages. The coefficient-of-variation-based assessment showed that the numerical specimen replication framework accounted for approximately 78%–79% of the laboratory variability in resilient modulus, but only about 13%–18% of the variability in the repeated creep slope parameter. These results indicate that stiffness variability is strongly influenced by aggregate arrangement and internal mixture structure, whereas repeated creep variability is governed mainly by testing-related factors and unmodelled damage or viscoplastic mechanisms. The proposed framework provides a computational procedure to distinguish microstructure-driven variability from external laboratory scatter in heterogeneous asphalt concrete.

15 January 2025 in Black Sea Journal of Engineering and Science
Verified
Journal Article
Closed access
AYAyhan Oner Yucel
Ayhan Oner Yucel
MGMurat Güler
Murat Güler
Asfalt karışımlarının sıkıştırılabilirliği, karışımların hedef yoğunluğa sıkıştırılmasının ne ölçüde kolay olduğunu tanımlamak için kullanılmaktadır. Asfalt karışımlarının sorunsuz şekilde sıkıştırılması, karışımdan beklenen performansı elde etmek için çok kritiktir. Agrega segregasyonu karışımdaki kaba agregaların belirli alanlarda kümelenmesi olarak tanımlanmakta olup, karışımın içyapısını etkileyen önemli bir durumdur. Bu çalışmada, agrega segregasyonunun asfalt karışımlarının hacimsel özelliklerine ve sıkıştırılabilirliğine etkileri incelenmiştir. Farklı koşulları simüle etmek için aynı sıkıştırma eforu uygulanarak ve aynı hedef yoğunlukta olmak üzere iki grup numune hazırlanmıştır. Her grup için ön koşulsuz-homojen ve iki seviyede segregasyona uğramış asfalt karışımı numuneleri Superpave yoğurmalı pres kullanılarak üretilmiştir. Segregasyona uğramış numuneler üretmek için tasarım gradasyonundaki kaba ve ince agregalar farklı oranlarda birleştirilerek hazırlanan karışımlar kalıba iki tabaka olarak yerleştirilip sıkıştırılmıştır. Üretilen numunelerin hacimsel özellikleri belirlenmiş ve numunelerin sıkışma eğrileri kullanılarak sıkıştırılabilirlik indeksleri hesaplanmıştır. Sonuçlar, agrega segregasyonunun, asfalt karışımlarının hacimsel özelliklerini ve sıkıştırılabilirliğini önemli ölçüde etkilediğini göstermektedir. Artan segregasyon seviyesi ile asfalt karışımlarının sıkıştırılabilirliğinin düştüğü ve aynı hedef yoğunlukta numune üretebilmek için çok daha fazla sıkıştırma eforu harcanması gerektiği belirlenmiştir.

29 May 2026 in Fatigue & Fracture of Engineering Materials & Structures
Verified
Journal Article
Open access
YKYalcin Karakaya
Yalcin Karakaya
MGMurat Guler
Murat Guler
This study evaluates the laboratory fatigue and rutting performance of two specification‐compliant asphalt mixture systems: an FAA‐compliant airfield mixture designed according to FAA AC 150/5370‐10H and a conventional highway mixture designed according to the Turkish General Directorate of Highways requirements. The FAA mixture used basalt aggregate and SBS‐modified binder, whereas the conventional mixture used limestone aggregate and neat binder. Both mixtures were designed using the Superpave volumetric method and tested with indirect tensile fatigue and repeated creep (flow number) tests. Under the adopted laboratory conditions, the FAA‐compliant mixture showed approximately 20% higher initial stiffness, 3.4 times longer fatigue life, and 6.8 times higher flow number than the conventional highway mixture. It also exhibited lower permanent strain accumulation and lower power model intercept and slope values, indicating reduced early deformation and a slower rate of strain growth. The differences in initial stiffness, fatigue life, and flow number were statistically significant ( p < 0.001). Because aggregate type, binder type, binder content, gradation, volumetric properties, and test conditions differed between the two mixtures, the results should be interpreted as a system‐level comparison of two practical mixture frameworks rather than the isolated effect of FAA mix design.