28 March 2018 in IEEE Transactions on Antennas and Propagation
Combining a reflectarray and a transmitarray together, a novel array antenna with bidirectional high-gain beams is proposed in this paper. A novel single-layer metalonly defected square-ring slot element, which has a near-zero thickness, is introduced as the phasing element. Full 360° phase shift range is achieved by utilizing the cross-polarized field of the phasing element. As a bidirectional high-gain antenna (bi-HGA), a transmit-reflect-array using the proposed elements is then designed, fabricated, and measured. It is only composed of a thin metallic sheet with 420 mm side length, spatially fed by a corrugated horn. Well-defined pencil beams are formed in broadside directions on both sides. The measured gains of the transmitted and reflected beams at 10 GHz are 25.5 dBi with 15% 1 dB gain bandwidth and 25 dBi with 14% 1 dB gain bandwidth, respectively. The proposed bi-HGA exhibits distinctive advantages of being ultrathin (0.0067λ 0 ), lightweight, and low cost without using dielectric substrates, and is a promising candidate for bidirectional wireless communication applications.
11 May 2018 in IEEE Transactions on Antennas and Propagation
A shared aperture quad-band high-gain reflectarray antenna (RA) is proposed. It has a stacked structure consisting of a Ka-band dual-band circularly polarized RA, a Ku-band wideband linearly polarized RA, and a tri-band double screen frequency selective surface (FSS) in between. It is able to simultaneously transmit and receive signals at both Ku and Ka bands. A prototype with a circular aperture of 400 mm in diameter is designed, fabricated, and tested for experimental verification. The measured gains are 31.0 dBi at 12.5 GHz, 32.0 dBi at 14.25 GHz, 36.1 dBic at 20.4 GHz, and 39.4 dBic at 30.2 GHz, respectively, and the corresponding aperture efficiencies are 45.6%, 44.0%, 56.0%, 54.8%, respectively. The radiation performance demonstrated in this work validates the feasibility of the proposed quad-band RA design for future satellite communications at both Ku and Ka bands.
22 May 2015 in IEEE Antennas and Wireless Propagation Letters
A 100-GHz metal-only reflectarray antenna is designed, fabricated, and tested. The required phase shift is achieved by simply tuning the metal block height, aiming to eliminate dielectric losses at high frequencies. An equivalent circuit model is employed to analyze the element reflection performance. A prototype reflectarray with a 30-mm square aperture is then fabricated and tested using near-field measurement setup. The measured results show an aperture efficiency of 50.1% at 100 GHz, and the measured radiation patterns agree very well with the full-wave simulation results. To compare the radiation performances, a parabolic reflector, a Fresnel zone plate reflector, and an unwrapped reflectarray of same size are also evaluated. The full-wave simulation results demonstrate that the proposed design not only achieves good radiation performance, but also exhibits advantages such as low profile, easy fabrication, and low cost.