28 November 2022 in IEEE Internet of Things Journal
To mitigate the overlapping of the radar and communication frequency bands caused by large-scale devices access, we propose a novel integrated sensing and communication (ISAC) system, where a micro base station (MiBS) simultaneously carries out both target sensing and cooperative communication. Concretely, the MiBS, acting as the sensing equipment, can also serve as a full-duplex decode-and-forward relay to assist end-to-end communication. Moreover, nonorthogonal downlink transmission (NO-DLT) is adopted between the macro base station and the Internet of Things devices, so that the spectrum utilization can be further improved. To facilitate the performance evaluation, both the exact and asymptotic outage probabilities, the ergodic rates associated communication, and the probability of successful sensing detection are characterized. Subsequently, a pair of problems of maximizing the receive signal-to-interference-plus-noise ratio of the sensing signal and maximizing the sum rate of communication are formulated that are solved by the classic Lagrangian method while exploiting the associated function monotonicity. Our simulation results demonstrate that: 1) The proposed ISAC NO-DLT system improves both the communication and sensing performance under the same power consumption as noncooperative NO-DLT and 2) the proposed power allocation (PA) schemes are superior to the random PA scheme.
26 April 2021 in IEEE Transactions on Aerospace and Electronic Systems
Time reversal can resolve multipath problems and increase the detection probability, but the detection performance decreases when the target is moving. Because of the change in the channel response due to target motion, the focusing effect of a time-reversal-transmitted signal is reduced. In this article, a novel method based on time reversal, which detects a moving target embedded in a multipath environment with channel variation, is proposed. We establish conventional and time-reversal signal models of a moving target in an indoor diffuse multipath environment and derive likelihood ratio tests under these two conditions. The channel parameters and the changes due to target motion are obtained by echo estimation and are exploited as useful information by the detectors. The channel changes are taken into account in the time-reversal detector to improve its robustness. The time-reversal detector proposed in this article possesses the constant-false-alarm-rate property with respect to the unknown background noise. Although Monte Carlo simulation analysis has illustrated the superior performance of both conventional and time-reversal detectors and proved that both methods can improve the detection probability by exploiting the multipath effect, the time-reversal method outperforms the conventional method due to the spatial and temporal focusing effect on the channel.
31 January 2023 in IEEE Transactions on Vehicular Technology
The design options of sensing-communication coexistence (SCC) vs. integrated sensing and communications (ISAC) relying on non-orthogonal downlink transmission (NO-DLT) and transmit antenna selection are investigated. To be practical, both realistic residual hardware impairments (RHI) and imperfect successive interference cancellation are considered. The performance of the SCC and ISAC NO-DLT frameworks is characterized by deriving both the exact and the asymptotic outage probabilities (OPs) as well as the probability of successful target detection (PoD). Our numerical results demonstrate the accuracy of the theoretical analysis and confirm that: 1) The ISAC NO-DLT framework is superior to the SCC NO-DLT framework both in terms of its OP and PoD; 2) The realistic RHI degrades the S&C performance of both the SCC and ISAC NO-DLT frameworks.
22 September 2023 in IEEE Internet of Things Journal
An integrated sensing and communication (ISAC) system is investigated, where the base station (BS) provides both uplink and downlink Internet of Things (IoT) services as well as target sensing services. Furthermore, nonorthogonal transmission (NO-T) is introduced for improving the spectrum efficiency. The deleterious effects of hardware impairments, channel estimation errors, and imperfect successive interference cancellation are taken into account. Both the exact and asymptotic outage probabilities (OPs) of the IoT devices as well as the Probability of successful Detection (PoD) are derived for characterizing the communication and sensing (C&S) performances. As a further development, in the presence of the sensing requirements, a communication-centric power allocation (PA) problem is formulated for maximizing the sum rate of the IoT devices. Given the nonconvexity of the problem, an alternating optimization algorithm is developed for finding a near-optimal PA. The simulation results confirm the accuracy of the analysis and demonstrate that: 1) the above nonideal factors degrade the C&S performances; 2) the NO-T ISAC system considered outperforms pure ISAC in terms of both its OP and PoD; and 3) compared to other baseline PA schemes, the proposed algorithm maximizes the sum rates while meeting the sensing requirements.
15 May 2020 in IEEE Access
A multistatic radar system can effectively improve the detection performance owing to its spatial diversity property. However, the detection performance will degrade when there exist multipaths. Time reversal has been proved to be able to transform the impact of the multipath into a favorable factor by matching propagation channels to achieve space-time focusing in a monostatic radar system. Therefore, we study the time reversal detection problem in a multistatic radar system with multipath environment in this paper. We divide the detection problems into two scenarios according to whether the channel response is known or not. In both scenarios, the time reversal detector and the conventional detector are derived respectively. Monte-Carlo experiments are used to examine the performance of the four detectors. The simulation results demonstrate that the time reversal detectors have a significant performance enhancement over the conventional detectors for the multistatic radar in a multipath environment, and more multipaths lead to better detection performance for the time reversal detectors. In addition, we also show that the detection probability improves with the increase of the number of radar transceivers.
26 April 2021 in IET Radar, Sonar & Navigation
Multistatic radar has the advantage of spatial diversity, but its detection performance is decreased in dense multipath scattering environments. This problem can be solved by using the time reversal (TR) technique to take advantage of the multipath effect to improve target detection; however, this usually requires a stationary channel response that is difficult to achieve in practice. This article studies a TR detection algorithm for a multistatic radar system in a varying multipath channel environment. We establish a varying channel response model and derive a time reversal likelihood ratio test (TR–LRT) detector to utilise the characteristics of multiple paths when the multipath environment is changing during the detection process. We use Monte Carlo simulations and theoretical analysis to show the superior performance of the proposed TR detector compared with a conventional detector. Our proposed TR–LRT detector shows good robustness to environmental variations. Simulation results show that better detection results are achieved in a more severe multipath scattering environment.