17 June 2014 in IOP Conference Series: Materials Science and Engineering
Thin, amorphous, high index, dense, low scattering & absorption (low extinction coefficient) and optical grade TiO2 films of various thicknesses are prepared by Atomic layer deposition (ALD) technique and investigated in terms of thermo-optic coefficient (dn/dT) and temperature dependent density (dρ/dT). The dn/dT and dρ/dT are calculated by modeling ellipsometric experimental data by developing appropriate optical model such as Cauchy Model. The modeled data was further modeled with Lorentz-Lorenz relation under least-square approach. The dn/dT of TiO2 films shows negative values for thin and positive values for relatively thicker films and reveals no significant changes in dn/dT and dρ/dT when film thickness increases more than ~ 200 nm. The coefficient values are calculated for a wavelength range of 380-1800 nm. The average values of (dn/dT)60nm=-4.2 ± 0.7 × 10-5 ˚C-1 and (dρ/dT)60nm=-6.6 ± 1.1 × 10-5 gcm-3 ˚C-1 at wavelength of 640 nm. The reported coefficients values are measured and calculated for TiO2 film of thickness t = 60 nm and described in detail.
24 February 2012 in Optics Letters
The idea of superresolving pupil filters comes from the concept of superoscillations that may occur in regions of a band-limited signal with small amplitude having oscillations faster than the fastest Fourier component of the signal. In optical microscopy, superresolution can be achieved by appropriate design of pupil functions where the angular aperture determines the ultimate focal spot smaller than the Abbe diffraction limit outside the evanescent field region. The angular aperture cannot be increased indefinitely and the huge sidelobes cannot be avoided that are present in superresolving filters. The limitations of using such kind of filters in microscopy applications are discussed through computational examples.
1 November 2001 in Optics Communications
17 April 2023 in Applied Physics Letters
Guided-mode resonances in diffraction gratings are manifested as peaks (dips) in reflection (transmission) spectra. Resonances with smaller line widths, i.e., with higher Q-factors, ensure stronger light–matter interactions and are beneficial for field-dependent physical processes. However, these high-Q resonances often suffer from strong angular and spectral dispersions. We demonstrate that a class of resonant modes with extraordinarily weak dispersion and Q-factor ∼1000 can be excited in crossed gratings simultaneously with the modes with well-known linear dispersion. Furthermore, the polarization of the incoming light can be adjusted to engineer the dispersion of these modes, and strong to near-flat dispersion or vice versa can be achieved by switching between two mutually orthogonal linear polarization states. We introduce a semi-analytical model to explain the underlying physics behind these observations and perform full-wave numerical simulations and experiments to support our theoretical conjecture. The results presented here will benefit all applications that rely on resonances in free-space-coupled geometries.
3 February 2006 in Microelectronic Engineering
1 December 2000 in Journal of the Optical Society of America A
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.