This paper describes the innovative optical design of the Metis coronagraph for the Solar Orbiter ESA-NASA mission. Metis is a multi-wavelength, externally occulted telescope for the imaging of the solar corona in both the visible and ultraviolet wavelength ranges. Metis adopts a novel occultation scheme for the solar disk, that we named “inverse external occulter”, for reducing the extremely high thermal load on the instrument at the spacecraft perihelion. The core of the Metis optical design is an aplanatic Gregorian telescope common to both the visible and ultraviolet channels. A suitable dichroic beam-splitter, optimized for transmitting a narrow-band in the ultraviolet (121.6 nm, HI Lyman-α) and reflecting a broadband in the visible (580–640 nm) spectral range, is used to separate the two optical paths. Along the visible light optical path, a liquid crystal electro-optical modulator, used for the first time in space, allows making polarimetric measurements.
1 October 2021 in The Astrophysical Journal Letters
This Letter addresses the first Solar Orbiter (SO)–Parker Solar Probe (PSP) quadrature, occurring on 2021 January 18 to investigate the evolution of solar wind from the extended corona to the inner heliosphere. Assuming ballistic propagation, the same plasma volume observed remotely in the corona at altitudes between 3.5 and 6.3 solar radii above the solar limb with the Metis coronagraph on SO can be tracked to PSP, orbiting at 0.1 au, thus allowing the local properties of the solar wind to be linked to the coronal source region from where it originated. Thanks to the close approach of PSP to the Sun and the simultaneous Metis observation of the solar corona, the flow-aligned magnetic field and the bulk kinetic energy flux density can be empirically inferred along the coronal current sheet with an unprecedented accuracy, allowing in particular estimation of the Alfvén radius at 8.7 solar radii during the time of this event. This is thus the very first study of the same solar wind plasma as it expands from the sub-Alfvénic solar corona to just above the Alfvén surface.
METIS (Multi Element Telescope for Imaging and Spectroscopy) METIS, the “Multi Element Telescope for Imaging and Spectroscopy”, is a coronagraph selected by the European Space Agency to be part of the payload of the Solar Orbiter mission to be launched in 2017. The mission profile will bring the Solar Orbiter spacecraft as close to the Sun as 0.3 A.U., and up to 35 out-of-ecliptic providing a unique platform for helio-synchronous observations of the Sun and its polar regions. METIS coronagraph is designed for multi-wavelength imaging and spectroscopy of the solar corona. This presentation gives an overview of the innovative design elements of the METIS coronagraph. These elements include: i) multi-wavelength, reflecting Gregorian-telescope; ii) multilayer coating optimized for the extreme UV (30.4 nm, HeII Lyman-) with a reflecting cap-layer for the UV (121.6 nm, HI Lyman-) and visible-light (590-650); iii) inverse external-occulter scheme for reduced thermal load at spacecraft peri-helion; iv) EUV/UV spectrograph using the telescope primary mirror to feed a 1st and 4th-order spherical varied line-spaced (SVLS) grating placed on a section of the secondary mirror; v) liquid crystals electro-optic polarimeter for observations of the visible-light K-corona. The expected performances are also presented
The use of Liquid Crystal Variable Retarders (LCVRs) as polarization modulators are envisaged as a promising novel technique for space instrumentation due to the inherent advantage of eliminating the need for conventional rotary polarizing optics hence the need of mechanisms. LCVRs is a mature technology for ground applications; they are wellknow, already used in polarimeters, and during the last ten years have undergone an important development, driven by the fast expansion of commercial Liquid Crystal Displays. In this work a brief review of the state of the art of imaging polarimeters based on LCVRs is presented. All of them are ground instruments, except the solar magnetograph IMaX which flew in 2009 onboard of a stratospheric balloon as part of the SUNRISE mission payload, since we have no knowledge about other spaceborne polarimeters using liquid crystal up to now. Also the main results of the activity, which was recently completed, with the objective to validate the LCVRs technology for the Solar Orbiter space mission are described. In the aforementioned mission, LCVRs will be utilized in the polarisation modulation package of the instruments SO/PHI (Polarimetric and Helioseismic Imager for Solar Orbiter) and METIS/COR (Multi Element Telescope for Imaging and Spectroscopy, Coronagraph).
This Letter reports the first observational estimate of the heating rate in the slowly expanding solar corona. The analysis exploits the simultaneous remote and local observations of the same coronal plasma volume, with the Solar Orbiter/Metis and the Parker Solar Probe instruments, respectively, and relies on the basic solar wind magnetohydrodynamic equations. As expected, energy losses are a minor fraction of the solar wind energy flux, since most of the energy dissipation that feeds the heating and acceleration of the coronal flow occurs much closer to the Sun than the heights probed in the present study, which range from 6.3 to 13.3 R⊙. The energy deposited to the supersonic wind is then used to explain the observed slight residual wind acceleration and to maintain the plasma in a nonadiabatic state. As derived in the Wentzel–Kramers–Brillouin limit, the present energy transfer rate estimates provide a lower limit, which can be very useful in refining the turbulence-based modeling of coronal heating and subsequent solar wind acceleration.