9 November 2017 in IEEE Transactions on Antennas and Propagation
A finite-difference time-domain (FDTD) modelling of finite-size zero thickness space-time modulated Huygens’ metasurfaces based on Generalized Sheet Transition Conditions (GSTCs), is proposed and numerically demonstrated. A typical all-dielectric Huygens’ unit cell is taken as an example and its material permittivity is modulated in both space and time, to emulate a travelling-type spatio-temporal perturbation on the metasurface. By mapping the permittivity variation onto the parameters of the equivalent Lorentzian electric and magnetic susceptibility densities, χee and χmm, the problem is formulated into a set of second-order differential equations in time with nonconstant coefficients. The resulting field solutions are then conveniently solved using an explicit finite-difference technique and integrated with a Yee-cell based propagation region to visualize the scattered fields taking into account the various diffractive effects from the metasurface of finite size. Several examples are shown for both linear and space-time varying metasurfaces which are excited with normally incident plane and Gaussian beams, showing detailed scattering field solutions.While the timemodulated metasurface leads to the generation of new collinearly propagating temporal harmonics, these harmonics are angularly separated in space, when an additional space modulation is introduced in the metasurface.
8 April 2021 in IEEE Transactions on Antennas and Propagation
A rigorous semianalytical Floquet analysis is proposed for modeling space–time-modulated metasurface and determining the scattered fields in terms of their harmonic components. The proposed method is based on generalized sheet transition conditions (GSTCs) treating a metasurface as a spatial discontinuity with zero thickness. The metasurface is described in terms of Lorentzian electric and magnetic surface susceptibilities, both tangential and normal to the surface, with parameters (e.g., resonant frequency) that are periodically modulated in both space and time. The unknown scattered fields are expressed in terms of Floquet harmonics, for which the amplitudes can be found by numerically solving a set of linear equations, leading to the total scattered fields. Using existing computational techniques and a commercial full-wave solver, the method is validated using several examples of pure-space and pure-time modulation with different modulation strengths and pumping frequencies. Finally, two cases of space–time modulation (standing wave perturbation and a traveling-wave perturbation) are presented to demonstrate the breaking of Lorentz reciprocity. The proposed method is simple and versatile and able to determine the steady-state response of a space–time-modulated metasurface that is excited with an oblique plane wave or a general incident field such as a Gaussian beam.
13 March 2020 in IEEE Transactions on Antennas and Propagation
A novel mm-wave amplitude-only direction-finding (DF) antenna front-end is proposed and experimentally demonstrated based on multi-port leaky-wave antennas (LWAs). The multi-port LWA is realized using an array of N linearly polarized slot antennas. Each slot antenna is engineered to produce a beam pointing along a specific direction, exploiting the beam-scanning law of LWAs. Realizing progressively shifted beams angularly in space by controlling the slot geometry of each antenna, the multi-port LWA becomes sensitive to a large finite angular sector. Using this architecture, a unique mapping between angle-ofarrival (AoA) and the port locations is achieved. Using detailed full-wave simulations, the DF operation of the slot-based LWA is successfully demonstrated for several examples involving single and multiple signals illuminating the antenna. It is demonstrated that the AoA can be determined by measuring the received power at each of the ports and the known radiation patterns of the LWAs. The DF antenna front-end is demonstrated experimentally at 60 GHz using a 10-port slot array antenna fabricated using substrate-integrated-waveguide (SIW) technology, and tested in various incoming signals scenarios.
7 April 2022 in IEEE Transactions on Antennas and Propagation
A simple method to describe spatially dispersive metasurfaces is proposed where the angle-dependent surface susceptibilities are explicitly used to formulate the zero thickness sheet model of practical metasurface structures. It is shown that if the surface susceptibilities of a given metasurface are expressed as a ratio of two polynomials of tangential spatial frequencies, k|| with complex coefficients, they can be conveniently expressed as spatial derivatives of the difference and average fields around the metasurface in the space domain, leading to extended forms of the standard generalized sheet transition conditions (GSTCs) accounting for the spatial dispersion. Using two simple examples of a short electric dipole and an all-dielectric cylindrical puck unit cells, which exhibit purely tangential surface susceptibilities and reciprocal/symmetric transmission and reflection characteristics, the proposed concept is numerically confirmed in 2D. A Lorentzian representation with angle-dependent parameters is further proposed and found to accurately model the complex temporal-spatial frequency response via their electric and magnetic susceptibilities of two unit cell examples - a metallic dipole and a dielectric puck resonator. For both cases, the appropriate spatial boundary conditions are derived.
9 January 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
A thin, flexible and transparent polyethylene terephthalate (PET) based screen-printed band-stop Frequency Selective Surface (FSS) with ink minimization is experimentally demonstrated at 28 GHz using both planar and conformal configurations. A miniaturized conventional FSS unit cell is ink-minimized using surface meshing without compromising the angular stability of the transmission response of the surface within ±60°. This not only leads to reduced amount of expensive ink required in prototyping, thereby lowering the overall manufacturing cost, but also increases the optical transparency of the structure by a factor of 65% using an 80 μm line-width tolerance. Finally, the operation of the ink-minimized FSS is experimentally shown using a conformal geometry with two radii of curvature (60 mm and 114 mm) and a good filtering performance is confirmed. Useful for 5G electromagnetic interference (EMI) applications, these FSSs feature increased feasibility through improved transparency and reduced cost due to ink minimization.
20 October 2020 in IEEE Transactions on Antennas and Propagation
A novel Huygens’ transmit-array is proposed based on a coupled-resonator approach to demonstrate millimeter-wave (mm-Wave) beam-forming for linear polarization. The proposed structure is simple and compatible with standard Printed Circuit Board (PCB) processes and utilizes a single dielectric substrate only. It is shown that by engineering the geometrical dimensions of the resonator, its electric (even-mode) and magnetic (odd-mode) resonances are excited in a balanced manner to achieve zero back-scattering in a large bandwidth. This operation principle of the proposed Huygens’ cell is explained in details using both an insightful equivalent circuit model, as well as full-wave eigenmode analysis. Next, the proposed Huygens’ cell is placed on top of a high gain 2D slot-array antenna, in its near-field, to engineer its aperture field distribution. Several transmit-array prototypes designed around the 60 GHz frequency band are demonstrated and experimentally characterized in both their near and far-fields, to achieve difference pattern generation, beam expansion and beam steering as application examples, in addition to a uniform surface demonstrating its low-loss performance.