Over the years, intensive research works have been devoted to conducting polymers due to their potential application in many fields such as fuel cell, sensors, and capacitors. To improve the properties of these compounds, several new approaches have been developed which consist in combining conducting polymers and nanoparticles. Then, this review intends to give a clear overview on nanocomposites based on conducting polymers, synthesis, characterization, and their application as electrochemical sensors. For this, the paper is divided into two parts: the first part will highlight the nanocomposites synthesized by combination of carbon nanomaterials (CNMs) and conducting polymers. The preparation of polymer/CNMs such as graphene and carbon nanotube modified electrode is presented coupled with relevant applications. The second part consists of a review of nanocomposites synthesized by combination of metal nanoparticles and conducting polymers.
A new sensor based on carbon paste electrode modified with Poly(1,8-diaminonaphthalene) and bismuth film (Bi-Poly1,8-DAN/CPE) was prepared and characterized with cyclic voltammetry and electrochemical impedance spectroscopy. The sensor was found to exhibit an electroactivity toward the sensing of lead using square wave voltammetry in acidic medium. Various operational parameters, such as concentration of Bi(III), square wave voltammetric parameters, deposition potential and deposition time were investigated. Under the optimized conditions, a linear range was achieved over concentration range from 0.5μgL−1 to 50μgL−1, with a detection limit of 0.3μgL−1 offering a good repeatability and reproducibility. Finally, the Bi-Poly1,8-DAN/CPE was applied for the analysis of lead in water samples with satisfactory results
A new and simple approach for carbaryl determination in natural sample was proposed using Low Silica X (LSX) zeolite modified carbon paste electrode. LSX zeolite with a porous structure was incorporated into carbon paste electrode in the appropriate portion. The prepared electrode was then characterized using scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectroscopy. Various experimental parameters as the zeolite amounts, pH, accumulation time, and differential pulse voltammetric parameters were optimized. Under optimal conditions, a linear response was obtained in the range of 1-100 µM of carbaryl using differential pulse voltammetry with detection limit of 0.3 µM (S/N = 3). The sensors showed good selectivity, stability, and reproducibility and has been successfully applied for detection of carbaryl in tomato samples with good recoveries.