31 August 2015 in Composites Research
Energy Absorption Characteristics of Z-shape Fabric under High Velocity Impact Z-shape design;Aramid fabric;Boundary condition effect;High velocity impact;Impact energy absorption characteristics;Stuffed Whipple shield; In this study, the Z-shape fabric design is proposed as the way to enhance the ballistic performance of fabrics which are used as the intermediate layer of stuffed Whipple shield configurations. The Z-shape fabric employs a different boundary condition from those of conventional configurations of fabrics which include 4 edge fixed. Impact analysis on Z-shape aramid yarns and fabrics using LS-DYNA software was performed and the results were compared with 2 edge fixed and 4 edge fixed fabrics to identify the high velocity impact energy absorption characteristics of the Z-shape fabric. It was revealed that the Z-shape showed different impact behavior and higher energy absorption performance than 2 and 4 edge fixed fabrics.
14 July 2017 in PHM Society Asia-Pacific Conference
Low velocity impact on composite structure can result in occurrence of barely visible impact damage (BVID) which are difficult to detect. Aircraft structures are vulnerable to such BVID because of low velocity impact due to runway debris, bird strike, tool drop, etc. Therefore, low velocity impact monitoring of composite structure is highly desirable for impact detection and localization. Additionally, SHM of large-scale structures with fewer numbers of sensors is desirable to reduce the complexity involved with the dataacquisition and processing. In this paper, feasibility of localizing low velocity impact on composite structure using a single sensor was investigated. Three FBG sensors were attached on the surface of the full-scale composite wing and the signal from each of the FBG sensor was processed using the error outlier based impact localization algorithm to predict the location of the impact. The localization results demonstrated the feasibility of localizing impact on composite structure using a single FBG sensor; overall, the impacts were localized with average error of about 26.6 mm.
30 June 2011 in Journal of The Korean Society for Composite Materials