This study presents an assessment of the vulnerability of regional aquifers as part of the Geological Survey of Canada project of characterization of fractured-rock aquifers in southwestern Quebec. Vulnerability assessment uses the physical properties of the setting to evaluate the sensitivity of groundwater to all types of pollutants introduced from the ground surface. Two methods, DRASTIC and GOD, were used for comparison purposes. Results indicate that the DRASTIC method yields a more detailed assessment. This method shows the higher vulnerability areas as coinciding with recharge zones in the northern, northwestern and southeastern parts of the study area, with the lower vulnerability areas located where clay cover is significant. When theGODmethod is used, the entire study area appears to have moderate vulnerability, which is not an adequate representation of the region.
The Annapolis-Cornwallis Valley Aquifer Study was a regional hydrogeological study focusing on major aquifer units of the most important agricultural area of Nova Scotia. The study area covered 2100 km2, and included sedimentary rocks of the Wolfville and Blomidon formations, as well as part of the North and South mountains bordering the valley. The surficial sediment cover is mainly composed of glacial tills, but sand and gravel units are also present in the eastern part of the valley. The main objectives of this project were to improve the general understanding of groundwater flow dynamics and to provide baseline information and tools for a regional groundwater resource assessment. The main bedrock aquifers of the Valley are located in the Wolfville and Blomidon formations, which are composed of lenticular bodies of sandstone, conglomerate, shale and siltstone in variable proportions. The aquifers are often confined and the flow is topographically-driven. Their hydraulic conductivities are in the range of 10-6-10-5 m/s. Good aquifers, though limited in extent, can also be found in the sand and gravel units, with hydraulic conductivities on the order of 10-4 m/s. Groundwater recharge was estimated to range between 115 and 224 mm/a over the entire study area. The vulnerability study showed that bedrock aquifers are typically less vulnerable than surficial aquifers, with the Wolfville Formation being the most vulnerable bedrock formation. Groundwater of the Valley is generally of good quality, although nitrate levels are of concern in several areas.
Agricultural activity, especially the application of fertilizers, is believed to be a major source of nitrates in groundwater and surface water in Prince Edward Island. Analyses of 107 groundwater and 17 surface-water samples from 4 seasonal field operations in the Wilmot River watershed, and 13 precipitation samples, indicate that average annual nitrate concentrations in groundwater are 6.5 mg/L N-NO3, with 22% of domestic wells exceeding the health guideline of 10 mg/L N-NO3. Concentrations in surface water average 6.2 mg/L N-NO3, but all are below 8 mg/L N-NO3. Stable isotopes of oxygen and hydrogen help delineate interactions between precipitation, groundwater and surface water. Groundwater values fall on or near the meteoric-water line for Charlottetown, indicating that groundwater may be derived entirely from modern local precipitation, although additional precipitation sampling is needed for confirmation. Surface waters have average isotope values similar to those for groundwater, implying that surface water is derived almost entirely from groundwater.
Delineating wellhead protection areas around existing wells can be difficult due to the complexity of the architecture and material that constitutes the aquifer. For example, the unconsolidated aquifers of the St. Lawrence Lowland often have a stripped shape, and simple analytical methods alone are usually inappropriate to define the wellhead protection areas. In this context, a HYBRID method was developed. This proposed method uses field observations and/or simple analytical methods to delineate the upgradient and downgradient boundaries of the wellhead protection areas.Asimple water balance between the aquifer recharge rate and the pumping well discharge rate serve to constrain the size of the elliptic wellhead protection areas. Not only is the method useful for the delineation of the zone of contribution, but also for the zone of travel.