1 January 2019 in Journal of Building Engineering
8 April 2025 in International Journal of Hydrogen Energy
14 July 2017 in Journal of Physics D: Applied Physics
This paper describes experimental performance data for MnFeP
1−
x
As
x
multilayer active magnetic regenerators. Five different matrices are tested: (i) one with three layers; (ii) one with six layers; and (iii) three, eight-layer regenerators where the layer thickness is varied. The tests are performed using a dual regenerator bespoke test apparatus based on nested Halbach permanent magnets. (PM II test apparatus at the University of Victoria.) Operating variables include displaced volume (3.8–12.65 cm 3 ), operating frequency (0.5–0.8 Hz) and hot-side rejection temperature (293–313 K). The results are mainly reported in terms of zero net load temperature span as a function of rejection temperature; a few tests with non-zero applied load are also presented. A maximum temperature span of 32 K is found for an eight-layer regenerator, which is similar to a previous work performed with gadolinium in the same experimental apparatus.
11 April 2014 in Journal of Thermal Science and Engineering Applications
The active magnetic regenerator (AMR) consists of a porous matrix heat exchanger whose solid phase is a magnetocaloric material (solid refrigerant) that undergoes a reversible magnetic entropy change when subjected to a changing magnetic field. The cooling capacity of the cycle is proportional to the mass of solid refrigerant, operating frequency, volumetric displacement of the heat transfer fluid and regenerator effectiveness. AMRs can be modeled via a porous media approach and a model has been developed in this work to simulate the time-dependent fluid flow and heat transfer processes in the regenerator matrix. Gadolinium (Gd) is usually adopted as a reference material for magnetic cooling at near room temperature and its magnetic temperature change and physical properties were accounted for through a combination of experimental data and the Weiss-Debye-Sommerfeld (WDS) theory. In this paper, the interaction of the applied magnetic field waveform with the heat transfer fluid displacement profile and the influence of demagnetizing effects on the AMR performance are investigated numerically. The numerical model is evaluated against experimental data for a regenerator containing spherical Gd particles.
1 July 2014 in Cryogenics
27 March 2008 in AIP Conference Proceedings
A technology demonstration test project was conducted by the Cryogenics Test Laboratory at the Kennedy Space Center (KSC) to provide comparative thermal performance data for glass microspheres, referred to as bubbles, and perlite insulation for liquid hydrogen tank applications. Two identical scale versions of the 3,200,000 liter spherical liquid hydrogen tanks at Launch Complex 39 at KSC were custom designed and built to serve as test articles for this test project. Evaporative (boil-off) calorimeter test protocols, including liquid nitrogen and liquid hydrogen, were established to provide tank test conditions characteristic of the large storage tanks that support the Space Shuttle launch operations. This paper provides comparative thermal performance test results for bubbles and perlite for a wide range of conditions. Thermal performance as a function of cryogenic commodity (nitrogen and hydrogen), vacuum pressure, insulation fill level, tank liquid level, and thermal cycles will be presented.