Optical and structural properties of float-type soda–lime–silica (SLS) glasses doped with 0·2 mol % TiO2, ZrO2, HfO2, Nb2O5, Ta2O5, MoO3 or WO3 have been studied. Under ultraviolet excitation all d0 doped glasses exhibit broadband visible emission centred between 19000 and 25000 cm–1 (400–525 nm) due to a transition from the 2p orbital of O2– to the metal d0 orbital. Dopant additions lead to shifts in the ultraviolet absorption edge to lower energies, with doped glasses having an absorption edge 2000 cm–1 (~20 nm), and in the case of MoO3, 4000 cm–1 (~40 nm), shifted relative to the corresponding undoped glass. Combined ultraiolet-visible absorption and X-band EPR spectroscopy analyses confirm that dopant cations occur in the studied glasses in the expected oxidation states of Ti4+, Zr4+, Hf4+, Nb5+, Ta5+, Mo6+ and W6+, although very low levels of Mo5+ are also observed, as demonstrated by the EPR resonance at g=1·92 (3·7 T). The incorporation of the studied dopants into SLS glasses may find applications as cover glasses in photovoltaic (PV) applications, providing ultraviolet protection of polymers and solar cell materials in PV units whilst enhancing solar cell efficiency through downconversion/fluorescence of absorbed ultraviolet photons with re-emission as visible photons, available for absorption and conversion by the solar cell material.
19 August 2020 in Journal of Materials Science: Materials in Electronics
Stabilised amorphous selenium (a-Se) is currently used in the majority of direct conversion mammographic X-ray imaging detectors due to its X-ray photoconductivity and its ability to be uniformly deposited over large area TFT substrates by conventional vacuum deposition. We report experimental results on photocurrent spectroscopy (frequency-resolved spectroscopy (FRS) and single-time transients), on vacuum-deposited a-Se films. We show that all measured photocurrents depend critically on the relative time spent by the material in the light and in the dark. We identify that the observed pronounced variation in optical response depends on the density of trapped (optically injected) charge within 200 nm of the surface and show that it is the ratio of dark and light exposure time that controls the density of such charge. Our data confirm that the localised charge radically influences the photocurrent transient shape due to the effective screening of the applied field within 200 nm of the surface. The field modification occurs over the optical extinction depth and changes both the photogeneration process and the drift of carriers. Many aspects of our data carry the signature of known properties of valence alternation pair (VAP) defects, which control many properties of a-Se. Modelling in the time domain shows that light generation of VAPs followed by optically triggered VAP defect conversion can lead to near-surface charge imbalance, demonstrating that VAP defects can account for the unusual optical response. The stabilised a-Se films were deposited above the glass transition temperature of the alloy with composition a-Se:0.3% As doped with ppm Cl. Electron paramagnetic resonance measurements at temperatures down to 5 K did not detect any spin active defects, even under photoexcitation above band gap.
A new dinuclear cobalt( ii ) complex efficiently catalyses the oxygen reduction reaction, with selectivity for H 2 O or H 2 O 2 controlled by the anion.