In the paper, a new phenomenological interpretation of some of the principal temporal effects of high-rate plastic deformation of metals from a united viewpoint is represented. A comparative analysis of some of the well-known dynamic plastic deformation models is given. Influence of strain rate on the stress-strain relation in a wide range of strain rates for different types of aluminum alloys and steels is described by the relaxation model of plasticity, by original and improved empirical Johnson-Cook models, and by the phenomenological Rusinek-Klepaczko model. It is shown that the structural-time model (“the relaxation model of plasticity”) is capable to effectively predict a wide spectrum of materials responses to fast and slow dynamic loading.
Laser shock peening with ultrashort laser pulses has been studied by hydrodynamic and atomistic simulations, as well as experimentally. It has been shown that, in contrast to traditional nanosecond pulses, ultrashort laser pulses allow one to increase the produced pressures by two or three orders of magnitude from 1–10 GPa to 1000 GPa (1 TPa). The physics of phenomena changes fundamentally because shock waves generating pressures exceeding the bulk modulus of a metal melt it. It has been shown for the first time that the shock melting depth at pressures about 1 TPa is an order of magnitude larger than the thickness of the melt layer caused by heat conduction. The appearance, propagation, and damping of a melting shock wave in titanium have been studied. The damping of the shock wave makes it possible to modify the surface layer, where the melting regime changes from a fast one in the shock jump to a slow propagation of the melting front in the unloading tail behind the shock wave. It has been shown experimentally that the ultrafast crystallization of the melt forms a solid layer with a structure strongly different from that before the action. The measured depth of this layer is in good agreement with the calculation.
1 May 2008 in Materials Science and Engineering: A
Dynamic brittle fracture under high-rate loading conditions is analyzed. A new numerical algorithm based on peridynamic approach and structural–temporal model of fracture is used to predict the start of a crack in glassy polymer samples. The results of calculations are compared with available experimental data.
Noncontact generation and detection of normal acoustic waves in a ferromagnetic metal sheet made of the 32NKD alloy are experimentally studied. The main relationships of the parameters of such processes are determined.