The high-precision positioning and navigation of agricultural machinery represent a backbone for precision agriculture, while its worldwide implementation is in rapid growth. Previous studies improved low-cost global navigation satellite system (GNSS) hardware solutions and fused GNSS data with complementary sources, but there is still no affordable and flexible framework for positioning accuracy assessment of agricultural machinery. Such a low-cost method was proposed in this study, simulating the actual movement of the agricultural machinery during agrotechnical operations. Four of the most commonly used GNSS corrections in Croatia were evaluated in two repetitions: Croatian Positioning System (CROPOS), individual base station, Satellite-based Augmentation Systems (SBASs), and an absolute positioning method using a smartphone. CROPOS and base station produced the highest mean GNSS positioning accuracy of 2.4 and 2.9 cm, respectively, but both of these corrections produced lower accuracy than declared. All evaluated corrections produced significantly different median values in two repetitions, representing inconsistency of the positioning accuracy regarding field conditions. While the proposed method allowed flexible and effective application in the field, future studies will be directed towards the reduction of the operator’s subjective impact, mainly by implementing autosteering solutions in agricultural machinery.
The paper presents a study of the influence of an uneven surface and number of tractor hours on vibration that is transmitted to the operator's hand-arm system during operation. The study was conducted on the asphalt, gravel and grass traversal during 2015 and 2016. The results indicate that the movement of a tractor on different agrotechnical surfaces generates vibrations of varying intensity that affect the hand-arm system of the operator. The highest vibration values were recorded on the asphalt, while the least vibrations were measured on the grass. The measured maximum vibration values are lower than the permissible 5 m·s−2 in the direction of all three axes, making it possible to assume that they are not harmful to the health of the operator.