Owing to the superior performances, silicon carbide (SiC) metal oxide semiconductor field effect transistors ( mosfet s) attract a lot of attention. To increase the power density, it is desired to use the third quadrant (3rd-quad) characteristics of the mosfet rather than the externally paralleled Schottky diode for freewheeling during the deadtime. It has been known that the 3rd-quad is far more than a body diode, and the MOS channel is also an important part of it. The channel may be not fully closed and, therefore, play a significant role in the reverse conduction even when the gate is zero or negatively biased. However, a comprehensive study of the 3rd-quad characteristics is still to be conducted. In this article, experiments and simulations are conducted and a physical model is developed to explain the 3rd-quad characteristics of the SiC mosfet . It reveals how and why the 3rd-quad characteristics are affected by the gate voltage and the junction temperature. This article is helpful for not only the application of SiC mosfet but also the device design.
31 August 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In situ temperature near the chips in a multiple-chip power semiconductor module is important information for thermal design validation, condition monitoring, and overheat protection. Due to the compact packaging structure and clamping force, online detection of the temperature is challenging for a press-pack module. This study attempts to achieve measurement by integrating optical fiber Bragg grating (FBG) sensors into the device. Different integration schemes are examined using experiments and theoretical analysis to show the effects on the transient performance. It is shown that FBG sensors with plate housing can effectively indicate the transient temperature ripple in normal converter operation, owing to the fast dynamic response of a small size sensor. The package integration has only minimal effects on the original distributions of electrical, thermal, and mechanical quantities within the power module.
26 July 2022 in IEEE Transactions on Instrumentation and Measurement
For press pack power semiconductor modules, the contact pressure is a key parameter to monitor their operating condition and health status. Direct internal measurement using conventional sensors has been difficult due to the restricted space and strong electromagnetic interference (EMI). This article proposes a method by using optical fiber Bragg grating (FBG) sensors. To facilitate the FBG measurement, the contact force needs to be converted into an appropriate tensile strain in a tailored spring stack structure within the modified power module, and the in situ contact pressure is then measured using integrated FBG sensors to detect this tensile strain. The thermal influence on the strain measurement is eliminated by temperature compensation. The sensitivity and accuracy of the proposed method are verified in experiments.
5 December 2024 in IEEE Transactions on Instrumentation and Measurement
This paper proposes a novel method for harmonics and disturbance suppression in permanent magnet synchronous motors (PMSMs) used in photoelectric tracking and measuring systems. The approach introduces a trigger-resonant-robust-current controller with a two-degrees-of-freedom structure (TR-RC-2DOF), composed of trigger-type resonant (TR) and robust current (RC) controllers. First, a trigger mechanism is developed to automatically engage the resonant controller when the current error falls below a certain threshold. Compared with the proportional-integral resonant (PI-R) controller and the PI-R controller with a low-pass filter (LPF), the proposed TR control strategy significantly reduces overshoot and oscillations while ensuring a fast convergence of the tracking error. This advantage contributes to optimizing the dynamic response. An improved filter is then introduced, incorporating the TR controller. A harmonic suppression term is added to the modified filter, forming a two-degrees-of-freedom (2DOF) structure with the original RC controller. The composite controller, with its cascaded design, allows for independent optimization of dynamic response and robustness, thereby enhancing disturbance suppression while maintaining satisfactory dynamic response. Finally, comparative simulations and experiments are conducted using MATLAB and a laboratory setup to validate the superiority of the proposed control method. The experimental results demonstrate that the TR-RC-2DOF controller outperforms the PI-R, PI-R with LPF, PI-TR, and RC control strategies in terms of transition performance, robustness against parameter mismatches, and harmonic rejection.