14 May 2020 in Optics Express
Through-focus scanning optical microscopy (TSOM) is a model-based optical metrology method that involves the scanning of a target through the focus of an optical microscope. Unlike a conventional optical microscope that directly extracts the diffraction-limited optical information from a single in-focus image, the TSOM method extracts nanometer scale sensitive information by matching the target TSOM data/image to reference TSOM data/images that are either experimentally or computationally collected. Therefore, the sensitivity and accuracy of the TSOM method strongly depends on the similarities between the conditions in which the target and reference TSOM images are taken or simulated, especially the lateral instability during through-focus scanning. As a remedy to the lateral instability, we proposed the application of adaptive optics to the through-focus scanning operation and initially developed a closed-loop system with a tip/tilt mirror and a Shack-Hartmann sensor, with which we were able to keep the plane position within peak-to-valley (PV) 33 nm. We then further developed a motion-free TSOM tool reducing the instability down to practically zero by the replacement of the tip/tilt mirror with a deformable mirror that performs through-focus scanning by deforming its mirror surface. The motion-free TSOM tool with a × 50 (NA 0.55) objective lens could provide a scanning range of up to ± 25 µm with a minimum step of 25 nm at a maximum update rate of 4 kHz. The tool was demonstrated to have a recognition accuracy of < 4 nm for critical dimension (CD) values in the range of 60 ∼ 120 nm with a reference TSOM image library generated by a Fourier modal method matching various observations conditions.
1 November 2006 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
12 December 2022 in Optics Letters
In the depth-map computer-generated hologram (CGH), inter-layer edge artifacts are observed in the discontinuous edges of section-wise depth-map objects. CGH synthesis, utilizing the hybrid smoothing method of silhouette masking and edge-apodization, alleviates unwanted inter-layer edge artifacts. The proposed method achieves improved de-artifact filtering that generates holographic images closer to the ground truth image of the depth-map object unattainable by the conventional CGH synthesis method.
20 December 2024 in Optics Express
We present the Fourier coupled modal method (FCMM) as a solution for large-scale photonic structure analysis, emphasizing its inherent parallelism, facilitated by spatial partitioning and Fourier modal field computation. The parallelism of the FCMM is achieved by integrating the coupled mode theory (CMT) within the Fourier modal method (FMM). The proposed numerical framework of the FCMM is detailed and validated through a comparative study with the conventional FMM.
6 July 2026 in Optics Letters
A complex spatial light modulator (SLM) based on three-phase covalent macropixels (3PCMPs) enables the generation of three-dimensional computer-generated holograms with inherent suppression of DC and conjugate noise. However, the noise-suppressed complex-field synthesis remains confined to the central viewing zone (VZ), imposing a fundamental limitation on the effective eye-box. We present a design of zone-switching 3PCMP SLM architecture that relocates the domain of noise-suppressed complex-field synthesis across a 3 × 3 array of addressable VZs in a pupil-tracked manner. The proposed scheme integrates a static six-level phase plate with active binary sub-pixel modulation to steer the complex signal toward the selected VZ while preserving suppression of DC and conjugate terms. Wave-optics simulations confirm effective zone switching of the complex signal and show substantially improved holographic image quality across higher-order VZs, enabling a 3 × 3 extension of the effective viewing zone. These results support the feasibility of extending the effective eye-box in complex holographic displays.