17 October 2023 in IEEE Antennas and Wireless Propagation Letters
A dual-polarized compact broadband filtering differential dielectric resonator antenna (DDRA) is proposed. For each polarization, an electric dipole is loaded on the symmetric plane of the dielectric resonator (DR) and utilized to excite the DR which further stimulates an upper dielectric patch (DP). Three differential resonances, the half-wavelength resonance of the dipole,TE y 111 (TE x 111 ) mode of the DR, and quasi- TE Z 121 (quasi- TE z 211 ) mode of the DP, are introduced into the operating band, respectively. The DP also improves the coupling degree of these resonances to obtain a broadband and flat-gain performance with high radiation efficiency. Furthermore, two radiation nulls at band edges are obtained without extra filtering circuits. The orthogonality of the degenerate modes enables dual-polarization for the design. A prototype is designed and implemented for verification.
22 February 2024 in IEEE Open Journal of Antennas and Propagation
A simple and low-cost shared aperture antenna module for 5G N78 and N257 applications is proposed. This module integrates a microwave (MW) patch antenna and a millimeter wave (MMW) substrate-integrated waveguide (SIW) slot antenna. The MW part employs splits etched on the patch and shorting vias to excite TM01, TM20, and TM21 modes simultaneously and generate a wide band covering N78 band. In the MMW part, beveled SIW cavities with additional metal vias are set on the same substrate of the patch antenna and extend the bandwidth of the slot antennas covering N257 band. The shared-aperture antenna module provides high port isolations, and high and flat gains for both bands. Moreover, the MMW beam scanning is manipulated in the E-and H-plane. A prototype is designed, implemented and measured for verification.
25 September 2025 in IEEE Antennas and Wireless Propagation Letters
A compact broadband cooperative-mode filtering differentially inserted-fed circular-polarized dielectric resonator (DR) antenna (DRA) is proposed. The dominant mode HEM111 of the circular DR is differentially stimulated by a pair of embedded bifurcated arc metal strips which generate two extra resonances. A cross slot etched on the reflecting ground and the cuttings on the DR are implemented to improve the axial ratio (AR), and introduce one more resonance to broaden the bandwidth for circular polarization in differential-end systems. An elliptic arc microstrip line is employed for the applications in single-end systems and provides more hybrid modes, resulting in a wider operation band. Two radiation nulls are also achieved at both edges of the band for high frequency selectivity. The proposed design method realizes broadband and filtering performance for circular-polarized DRAs without increasing the size.