1 January 2022 in International Journal of Thermal Sciences
6 September 2023 in International Journal of Thermal Sciences
12 September 2017 in International Journal of Engine Research
The aim of this study is to investigate in details the effects of a number of combustion parameters to optimize the reactivity controlled compression ignition operation running on natural gas and diesel fuel. In the present work, a single-cylinder heavy-duty diesel engine with a specially modified bathtub piston bowl profile for reactivity controlled compression ignition operation is studied and simulated through commercial software. A broad load range from 5.6 to 13.5 bar indicated mean effective pressure at a constant engine speed of 1300 r/min, fixed amount of diesel fuel mass, and with no exhaust gas recirculation is considered. The results from the developed model confirm that the model can accurately simulate the reactivity controlled compression ignition combustion. Also, by focusing on the time of formation of certain important radicals in combustion, the start of combustion and the time of natural gas dissociation are accurately predicted. Furthermore, the influence of some parameters such as different diesel fuel injection strategies, intake temperature, and intake pressure on the reactivity controlled compression ignition combustion is evaluated and the limitation of the engine operation at low temperature combustion is investigated.
1 September 2021 in International Journal of Hydrogen Energy
26 February 2019 in International Journal of Engine Research
The aim of this study is to implement the multi-input–multi-output optimization of reactivity-controlled compression-ignition combustion in a heavy-duty diesel engine running on natural gas and diesel fuel. A single-cylinder heavy-duty diesel engine with a modified bathtub piston bowl profile is set on operation at 9.4 bar indicated mean effective pressure and running at a fixed engine speed of 1300 r/min. A certain amount of diesel fuel mass per cycle is fed into the engine at a fixed equivalence ratio without any exhaust gas recirculation. The optimization targets include reduction in engine emissions as much as possible, avoiding diesel knock occurrence, and achieving low temperature combustion concept with the least or no engine power losses. To implement the optimization, the effects of three control factors on the engine performance are assessed by the design of experiment concept—fractional factorial method. These selected control factors are intake temperature and intake pressure (both at intake valve closing) and the diesel fuel start of injection timing. Some randomized treatment combinations of chosen levels from the three selected control factors are employed to simulate reactivity-controlled compression-ignition combustion. Based on the engine’s responses derived from the simulation, reactivity-controlled compression-ignition combustion’s mathematical model is identified directly using an artificial neural network. Next, an optimization process is conducted using two different optimization algorithms, namely, genetic algorithm and particle swarm optimization algorithm. For assessing and validating the obtained optimal results, the obtained data are used to simulate reactivity-controlled compression-ignition combustion as the engine input factors. The results show that the proposed artificial neural network design is effectively capable of identifying reactivity-controlled compression-ignition combustion’s mathematical model. Also, by optimizing reactivity-controlled compression-ignition combustion through different optimization algorithms, the optimal range of the engine operation at 9.4 bar indicated mean effective pressure is well estimated and extended.
28 July 2015 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
The unsteady viscous flow and heat transfer in the vicinity of an unaxisymmetric stagnation-point flow of an infinite moving cylinder with time-dependent axial velocity and non-uniform normal transpiration \( U_{0} \left( \varphi \right) \) are investigated. The impinging free stream is steady with a strain rate \( \bar{k} \). A reduction of the Navier–Stokes and energy equations is obtained by use of appropriate similarity transformations. The semi-similar solution of the Navier–Stokes equations and energy equation has been obtained numerically using an implicit finite-difference scheme when the axial velocity of the cylinder and its wall temperature or its wall heat flux varies as specified time-dependent functions. In particular, the cylinder may move with different velocity patterns. These solutions are presented for special cases when the time-dependent axial velocity of the cylinder is a step function, a ramp, and a non-linear function. All the solutions above are presented for Reynolds numbers, \( \text{Re} = \bar{k}a^{2} /2\upsilon \), ranging from 0.1 to 100 for different values of Prandtl number and for selected values of transpiration rate function, \( S(\varphi ) = U_{0} (\varphi )/\bar{k}a \) where a is cylinder radius and υ is kinematic viscosity of the fluid. Dimensionless shear stresses corresponding to all the cases increase with the increase of Reynolds number and transpiration rate function. An interesting result is obtained in which a cylinder moving with certain axial velocity function and at particular value of Reynolds number is axially stress free. The heat transfer coefficient increases with the increasing transpiration rate function, Reynolds number and Prandtl number. Interesting means of cooling and heating processes of cylinder surface are obtained using different rates of transpiration rate function. It is shown that a cylinder with certain type of exponential wall temperature exposed to a temperature difference has not heat transfer.