Monika Łazor

Monika Łazor

Auto-generated profile, based on publicly available information

Monika Łazor

Warsaw University of Technology, Faculty of Chemistry

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2024 in Journal of Environmental Management
Verified
Journal Article
Open access
KMKatsiaryna Martsinchyk
Katsiaryna Martsinchyk
AMAliaksandr Martsinchyk
Aliaksandr Martsinchyk
MŁMonika Łazor
Monika Łazor
PSPavel Shuhayeu
Pavel Shuhayeu
JKJakub Kupecki
Jakub Kupecki
JMJarosław Milewski
Jarosław Milewski
Power-to-Gas (P2G) is considered as a promising energy storage technology in a long-time horizon. The rapid growth in the share of intermittent renewables in the energy mix is driving forward research and development in large-scale energy storage. This paper presents a feasibility analysis of a power-to-gas system in terms of various operating points and capacities. The analysis was performed using a system model, which features a solid oxide electrolyzer (SOE), a CO2 separation unit, and a methanation reactor as the key components. For the purposes of the techno-economic assessment (TEA) of the system, the CAPEX/OPEX estimation was performed and the cost structure defined. The model proposed in the study enables system-level optimization, including technical and economic criteria, considering two nominal scales: 10 kW and 40 GW, which corresponds to the nominal capacity of SOE in each case. According to the study, in an SOE-based P2G system, the cost of synthetic natural gas (SNG) production will fall by 15-21% by 2030 and 29-37% by 2050. SNG production would cost 3.15-3.75 EUR2023/kgSNG in 2030 and 2.6-3.0 EUR2023/kgSNG in 2050 for systems with SOE power >10 MW. Generally, product cost reductions occur as a result of material development and large-scale production, which influences the system's CAPEX. According to the research, the technology will break even by 2050. The large-scale power-to-gas system with a total of 40 GW installed capacity delivers a product price of 2.4 EUR2023/kgSNG with the average conversion efficiency of 68%.

24 June 2025 in Energies
Verified
Journal Article
Open access
PDF file
PSPavel Shuhayeu
Pavel Shuhayeu
ODOlaf Dybinski
Olaf Dybinski
KMKarolina Majewska
Karolina Majewska
AMAliaksandr Martsinchyk
Aliaksandr Martsinchyk
MŁMonika Łazor
Monika Łazor
Jaroslaw MilewskiJaroslaw Milewski
Jaroslaw Milewski
High-temperature fuel cells and electrolyzers, particularly molten carbonate fuel cells (MCFCs) and Molten Carbonate Electrolyzers (MCEs), are expected to play a critical role in clean power generation, hydrogen production, and integrated CO2 separation. Unfortunately, despite their potential, these technologies have not yet reached full commercialization. The main reason for this is material degradation. In particular, the corrosion of metallic components continues to be a leading cause of performance loss and system failure. This review provides a comprehensive assessment of degradation mechanisms in MCFC and MCE systems. It examines key metallic components, such as current collectors and bipolar plates, focusing on the performance of commonly used materials, including stainless steels and advanced alloys, under prolonged exposure to corrosive environments. To address degradation issues, this review evaluates current mitigation strategies and discusses material selection, protective coatings application, and the optimization of operational parameters. Advances in alloy development, coatings, surface treatments, and process controls have been compared in terms of effectiveness, scalability, and long-term stability. The review concludes with a synthesis of current best practices and future directions, emphasizing the need for integrated, multi-functional solutions to achieve the lifetimes required for full commercialization. By linking materials science, electrochemistry, and systems engineering, this review offers directions for the development of corrosion-resistant MCFC and MCE technologies in support of a hydrogen-based, carbon-neutral energy future.

1 April 2025 in International Journal of Hydrogen Energy
Verified
Journal Article
Open access
MŁMonika Łazor
Monika Łazor
YNYevgeniy Naumovich
Yevgeniy Naumovich
LALeszek Ajdys
Leszek Ajdys
Aleksey YaremchenkoAleksey Yaremchenko
Aleksey Yaremchenko
AŻAgnieszka Żurawska
Agnieszka Żurawska
PWPaulina Wiecińska
Paulina Wiecińska

1 January 2023
Verified
Conference Paper
Closed access
WWWydział Mechaniczny Energetyki i Lotnictwa Politechnika Warszawska
Wydział Mechaniczny Energetyki i Lotnictwa Politechnika Warszawska
AMAliaksandr Martsinchyk
Aliaksandr Martsinchyk
MŁMonika Łazor
Monika Łazor
PWPolitechnika Warszawska
Politechnika Warszawska
IWInstytut Energetyki – Instytut Badawczy Centrum Technologii Wodorowych
Instytut Energetyki – Instytut Badawczy Centrum Technologii Wodorowych
ABArkadiusz Baran
Arkadiusz Baran
HYFLOW is a system promoting the expansion of low-carbon energy sources, perfectly in line with the objectives of the latest EU climate improvement regulations. The concept of the project is Power-to-Fuel (PTF) conversion, which will thus enable the production of low- or even zero-emission synthetic fuels so-called e-fuels with high energy density, a wide range of applications and closed-loop CO2 emissions. The technology is based on a revolutionary approach involving the integration of a high-temperature co-electrolysis system together with a Fischer-Tropsch (F-T) reactor for the synthesis of liquid fuels, with a view to utilizing the energy and CO2 from the combustion of e-fuels in a closed loop. The HYFLOW project is being developed by researchers from the Warsaw University of Technology, consisting of: Arkadiusz Baran, Katsiaryna Martsinchyk, Monika Lazor, Pavel Shuhayeu headed by team leader Aliaksandr Martsinchyk at the Faculty of Power and Aerospace Engineering.

24 November 2025 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
YNYevgeniy Naumovich
Yevgeniy Naumovich
PBPaweł Boguszewicz
Paweł Boguszewicz
MLMonika Lazor
Monika Lazor
MKMagdalena Kosiorek
Magdalena Kosiorek
LALeszek Ajdys
Leszek Ajdys
Commercialization of solid oxide cell-based devices requires the introduction of low-cost and abundant materials to decrease production expenses. One of the bottlenecks in state-of-the-art SOFC and SOE stacks design is an interconnect steel. While Crofer 22APU from VDM Metals, Acerinox is the dedicated and proven solution, it is expensive and not readily available in large amounts. The known alternative includes less specific ferritic steels, namely AISI 441 and AISI 444, and widespread AISI 430. Substitution of the Crofer 22APU with alternative steels requires a thorough investigation of the novel protective layers on the air side and the stability of the interconnect exposed to the DC under high drops of oxygen and hydrogen chemical potentials. The dedicated test rig was developed and built in the Institute of Power Engineering – National Research Institute (IEN-PIB) for the dual-atmosphere studies of the ASR on stacked steel samples. In this rig the investigated samples can be assembled in the pseudo-stack with up to 14 steel-to-steel interfaces and a visible contact surface of 3x3 cm 2 (direct contact area ~2.4 cm 2 ). Half of the samples are corrugated in a manner that should represent the shape of the real interconnects. Pseudo-stack is sealed with mica-glass composite and operated being fed with air and with the 50 vol.% H 2 O-50 vol.% H 2 mixture. Usage of the LSCF as a contact helper allows trap the volatile Cr compound in case of the misfunction of the protective layer for the further analysis. The test rig supports the application of the current up to 30 A and continuous long-term operation (+ 1000 h). Preliminary tests demonstrated that at reference samples ASRs stay on the air side of the level of 10-15 mΩ*cm 2 and for the fuel side observed values are below 0.5 mΩ*cm 2 with minor degradation after 200 h of measurements at 700 °C. Work was supported by the National Science Centre NCN, Poland, grant UMO-2023/49/B/ST8/03265.

24 November 2025 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
JKJakub Kupecki
Jakub Kupecki
LALeszek Ajdys
Leszek Ajdys
EAEwa Andruszków
Ewa Andruszków
MBMaciej Bakala
Maciej Bakala
MBMarcin Błesznowski
Marcin Błesznowski
NKNikodem Kaim
Nikodem Kaim
Recent years were focused on various aspects of solid oxide electrolyzers in order to advance the technology by increasing durability and performance, and reducing fabrication time, process waste as well the cost. Continuous development is an integral part of scaling-up of the technology which currently seeks first large-scale industrial deployments. There are only several megawatt-scale solid oxide electrolysis plants, and more are to come. Among others, MEGA-SOE project which is a joint activity of ORLEN and the Institute of Power Engineering – National Research Institute should be noted. It focuses on5 MW-class easy to deploy and modular solid oxide electrolysis unit. These activities are based on a 5 kW SOC stack show in Fig. 1 which is a building block of systems discussed in the work. SOE offer a great advantage over other types of electrolyzers as they can be thermally integrated with various process in order to benefit from the available external source of steam and/or heat which adds to the performance of the process. In order to lower cost of SOC, the team at the Center for Hydrogen Technologies at the Institute of Power Engineering – National Research Institute incorporated additive manufacturing and low-cost of fabrication. The composite seals which are used in the stack are based on 3D printing, and ceramic support of solid oxide electrochemical cells are produced using high pressure injection molding. Article discussed these methods in the light of reduction of process waste and fabrication time. Additionally, introduction of composite electrodes and alternative materials for coatings which aid in gradual elimination of Cobal from SOC stack are discussed. MEGA-SOE is built on earlier experience and cooperation between IPE-NRI and ORLEN in frame of HYDROGIN (Fig. 2) and VETNI (Fig. 3) project which deliver 10 kW rSOC integrated with biomass boiler and 30 kW-class SOE integrated with refining process. Currently, 400 kW rSOC is under construction and the project ultimately seeks for a 5 MW unit to be integrated with refining plant in Gdansk, Poland. The article discusses key technical challenges as well current performance of modules which are used in large-scale systems, including operation both in electrolysis and reversible mode. In the work selected novelties introduced at the level of layers and coatings for increasing durability of solid oxide cells are presented and discussed, therefore work is a comprehensive review of recent advanced and technology scale-up. Fig. 1 5 kW SOC stack by the Institute of Power Engineering – National Research Institute. Fig. 2 10 kW rSOC HYDROGIN system integrated with power plant in Elbląg, Poland Fig. 3 30 kW SOE VETNI system integrated with refining plant in Jasło, Poland Fig. 4 Visualization of 5 MW SOE MEGA-SOE system (under construction) Acknowledgments The presented research was financially supported by the National Centre for Research and Development under MEGA-SOE project, grant agreement NTE-I/0022/2021-00. Figure 1 Figure 2