Vasily Ivanovich Lyashenko

Vasily Ivanovich Lyashenko

Auto-generated profile, based on publicly available information

Vasily Ivanovich Lyashenko

Ukrainian Research and Design-Intelligence Institute of Industrial Technology” , Zhovti Vody , Ukraine

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2022 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
VLVasyl Lyashenko
Vasyl Lyashenko
BABoris Andreev
Boris Andreev
TDTamara Dudar
Tamara Dudar
Purpose. Substantiation of mining-technical and environmental safety of underground mining of complex-structure ore deposits based on the study of a rock mass stress-strain state (SSS), as well as determining the safe parameters of stopes for specific mining-geological conditions and patterns of rock pressure propagation in various environments. Methods. To assess the improvement of mining-technical and environmental safety of mining operations, the research includes theoretical generalizations with the use of mathematical statistics, physical and mathematical modeling, performing calculations, as well as technical and economic feasibility, laboratory and full-scale experimental studies, industrial tests in mine conditions and on the earth's surface in the zone of blasting influence, based on the standard and new methods. Findings. A functional interrelation between the rock mass SSS value and the number of impulses (destruction sounds) per minute, characterizing its structural (а) and strength (b) properties, is proposed, which is described by a curvilinear dependence of the type y = axb and allows to quickly determine the stable parameters of stopes. Assessment and prediction are made for various forms of rock pressure manifestation, based on the stress concentration coefficient within 0.91 Kv 0.70, taking into account the conditions of the elastic behavior of rocks. The value of = 0.0002-0.0003 is taken as permissible relative deformation, which ensures both mining-technical and environmental safety, as well as the rock mass stability during repeated blasting operations. Originality. A classification of the rock mass SSS has been developed depending on the direction of the maximum stresses relative to the mine working location, the level of the rock mass stress state and the mechanism of rock pressure manifestation (η), as well as the category of rock-bump hazard. In particular, the rock mass with the values in the range oof 0.12 < η ≤0.2; 0.2 < η ≤ 0.3; 0.3 < η ≤ 0.5 and η > 0.5 are classified as non-rock-bump hazardous and belong to III, II, and I hazard categories, respectively. Practical implications. To substantiate the safe parameters of stopes based on the results of multi-year research into underground mining of complex-structure deposits, depending on the rock mass properties, a graphical-analytic method (nomographic charts and calculation formulas) is recommended. These parameters are determined for highly fractured, medium fractured and weakly fractured rock mass with its horizontal outcropping to the surface. Using this method, the Instruction on the Geomechanical Substantiation of the Safe Mining of the Reserves at the Skhidnyi Hirnycho-Zbahachuvalnyi Kombinat, DP (SE VostGOK), Ukraine, has been developed.

1 May 2018 in Occupational Safety in Industry
Verified
Journal Article
Closed access
NPNational Technical University «Dneprovskaya Politekhnika»
National Technical University «Dneprovskaya Politekhnika»
OKO.E. Khomenko
O.E. Khomenko
Maksym KononenkoMaksym Kononenko
Maksym Kononenko
VLV.I. Lyashenko
V.I. Lyashenko
G«GP «UkrNIPIIpromtekhnologii»
GP «UkrNIPIIpromtekhnologii»

5 October 2020 in Izvestiya. Ferrous Metallurgy
Verified
Journal Article
Open access
PDF file
VLV. I. Lyashenko
V. I. Lyashenko
Vladimir Ivanovich GolikVladimir Ivanovich Golik
Vladimir Ivanovich Golik
VDV. Z. Dyatchin
V. Z. Dyatchin
One of the most problematic points in technology for storing ore enrichment waste materials with hardener admixture into underground mined space and tailing dumps are the tailings of hydrometallurgical plant (HMP). They are supplied through a slurry pipeline to the tailing dump in form of pulp with solid to liquid mass ratio of 1:2. Liquid phase of the pulp after gravity separation and clarification in tailing dump is returned to technological cycle of HMP. Storage technology under consideration has several disadvantages: high nonrecurrent capital costs for construction of tailing dump at full design capacity; high probability of harmful chemicals migration into groundwater if protective shields of the base or sides of tailings are damaged. The authors have used data from literature and patent documentation considering storage parameters, laboratory and production experiments, physical modeling and selection of compositions of hardening mixtures. Analytical studies, comparative analysis of theoretical and practical results by standard and new methods were performed. Possibility of using hardening mixtures with adjacent production wastes used as binders was established. Optimal composition of ingredients per 1 m3 of hardening mixture is proposed as follows: 1350 – 1500 kg of HMP tailings; 50 - 70 kg of binder (cement); 350 liters of mixing water. Proposed technology of ore enrichment waste storage into underground mined space and tailings with hardener admixture application allows using underground mined space at the enterprise production capacity of 1,500 thousand tons per year to store 50 – 55 % of tailings, and store the rest wastes cemented by binding material in repository. When filling the entire area of the tailing dump mirror of 10 m height with cemented tails and HMP capacity of up to 1.5 million tons per year, its operation life is extended by 50 years.

28 February 2020 in Obogashchenie Rud
Verified
Journal Article
Closed access
VLV. I. Lyashenko
V. I. Lyashenko
Vladimir Ivanovich GolikVladimir Ivanovich Golik
Vladimir Ivanovich Golik
VDV. Z. Dyatchin
V. Z. Dyatchin
This paper covers the results of studies on improving the efficiency of storage of tailings in underground mined-out spaces and tailings facilities in the form of a hardened mass in order to ensure their environmental safety. The experience of using hardening mixes and the methodology for studying the hardening of tailings of hydrometallurgical plants and for the assessment of their strength are presented. The action mechanism for migrating dust and water flows from the tailings storage facilities and metallurgical sections is established for metal-containing ores. It is shown that dust migration ceases when compression strength of the fixed mass reaches (1.0–1.5)·105 MPa with the air flow velocity of 15 m/s. The possibility of using hardening mixes and binders represented by related production waste was established; the best composition per 1 m3 of the mix was proposed, consisting of hydrometallurgical plant tailings of 1350–1500 kg, a binder (cement) of 50–70 kg, and mixing water of 350 l. A new technology for the preparation of hardening mixes for the immobilization of tailings when filling mined-out spaces and surface tailings facilities was recommended and used in the feasibility study for the construction of a mine at an ore deposit (SE VostGOK, Ukraine). With the production capacity of 1,500 ktpa, 50–55 % of the tailings are used for filling mined-out spaces (830 ktpa) and the remaining material is mixed with a binder and stored at a tailings facility in the form of a hardened mass (670 ktpa). This arrangement allows filling the entire tailings facility surface to the height of 10 m with bound tailings and extend its life by 50 years.

30 June 2021 in Technology audit and production reserves
Verified
Journal Article
Open access
PDF file
VLVasil Lyashenko
Vasil Lyashenko
OKOleh Khomenko
Oleh Khomenko
TCTatiana Chekushina
Tatiana Chekushina
TDTamara Dudar
Tamara Dudar
FTFedor Topolnij
Fedor Topolnij
The object of research is traditional mining technologies and technical means in combination with underground block leaching (UBL) of metals from rock ores with their preliminary crushing with explosives in installations mounted in mine workings. One of the most problematic areas is the difficulty of achieving a given crushing quality, as well as the required height of ore storage in the chamber for the subsequent leaching of metals and a loosening factor, taking into account the control of the energy of explosive destruction of rock ores. The study used: – data from literary sources and patent documentation in the field of technologies and technical means for UBL of metals from ores in energy disturbed massifs, substantiation of technological parameters of operational blocks; – laboratory and production experiments; – physical modeling of metal extraction from ores from the average linear size of a piece of blasted ore. Analytical studies, comparative analysis of theoretical and practical results using standard and new methods were carried out with the participation of the authors. It was found that the most intensive infiltration leaching occurs when the size class of ore lumps is –100+0 mm. Metals are extracted from fractions –200+100 mm less intensively and for a longer time. To neutralize and flush the spent ore mass, it is recommended to treat it with lime solution and mine water through wells for supplying leaching solutions (irrigation system). The protection of the hydrogeological environment is carried out by silting the bottom of the chamber for collecting productive solutions with clay solution and by constant monitoring of mine water pollution in the zone of UBL influence. On the basis of the positive results obtained from the study and implementation of technologies for UBL of metals from rock ores during the development of block 5–86, in accordance with the recommendations issued, the same approach was used for blocks 5–84–86 and 5–88–90, as well as industrial experimental block 1–75–79. Due to the involvement in the production of substandard ores, the raw material base for the extraction of metals, at the operating mines, can be increased by 1.4–1.6 times. The research results can be used in underground mining of ore deposits of complex structure in Ukraine, the Russian Federation, the Republic of Kazakhstan and other developed mining countries of the world.

12 April 2022 in Mining Science and Technology (Russia)
Verified
Journal Article
Open access
PDF file
VLV. I. Lyashenko
V. I. Lyashenko
Vladimir Ivanovich GolikVladimir Ivanovich Golik
Vladimir Ivanovich Golik
Roman Vladimirovich KlyuevRoman Vladimirovich Klyuev
Roman Vladimirovich Klyuev
One of the most problematic aspects of underground block leaching (UBL) of metals from ores is the possibility of pollution of water and air in the affected zone. Therefore, proving the possibility of mitigating environmental impact of metal leaching from ores by managing production processes with the implementation of nature- and resource-saving technologies is an important objective. The purpose of this study is to justify underground development effectiveness of ore deposits by traditional and integrated methods with leaching of metals from substandard and off-balance ores. This will allow the raw material base for extraction of metals from off-balance ores to be expanded and the environmental impact on subsoil and groundwater (hydrogeological systems) to be mitigated. A distinctive feature of a UBL (underground site for leaching of metals from shrunk ores) is that leaching solutions are supplied from sorption column placed in mining workings of the leaching level in the immediate vicinity of the extracting block. The pregnant solutions in the form of resin are discharged from the sorption column, placed in the leaching level mine workings, then winded in mine cars and further supplied to hydrometallurgical plant in tanks. A still rare attempt to justify the efficiency and environmental safety of underground metal leaching (UBL) from off-balance and substandard rock ores in installations mounted in mine workings, on the basis of monitoring and evaluation of subsoil and groundwater conditions was investigated. The average value of uranium concentration by level was established: 210 m – 3.6 mg/L; 225 m – 3.58 mg/L; 280 m – 0.91 mg/L. At the same time no contamination of underground mine waters was detected. Levels of sulfuric acid aerosols and radon decomposition products did not exceed the maximum allowable concentration (MAC) values. It is recommended that the hydrogeological environment be protected through silting the bottom of the stope for collection of pregnant solutions with clay mud and construct semi-active water-permeable chemically active barriers. The mentioned BIL process was implemented during the development of pilot block 5-86 and recommended for blocks 5-84-86 and 5-88-90 of Michurinskoye deposit of SE VostGOK, Ukraine, as well as during for development of ore deposits in Russia, Kazakhstan, and other developed mining countries.