Juha Tuomela

Juha Tuomela

Auto-generated profile, based on publicly available information

Juha Tuomela

Department of Electronics and Nanoengineering, School of Electrical Engineering, Aalto University, Espoo, Finland

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2024 in IEEE Access
Verified
Journal Article
Open access
BXBing Xue
Bing Xue
KHKatsuyuki Haneda
Katsuyuki Haneda
CIClemens Icheln
Clemens Icheln
JAJuha Ala-Laurinaho
Juha Ala-Laurinaho
JTJuha Tuomela
Juha Tuomela
This paper presents a novel low-complexity method to characterize the permittivities of low-loss dielectric slabs at millimeter-wave and sub-terahertz bands. The method assumes plane-wave illumination of the material under test and utilizes reflected fields on two air-material interfaces, resolved through a sufficiently wide-band measurement. Unlike conventional methods, it does not need a reference measurement using a metal plate and a back metal plate. The applicability of the method is discussed. The misalignment of a reference plane and the effects of the gap between the back metal and the material under test are analyzed for published reflected-field based methods to show the advantages of the method. Finally, the proposed method is applied to estimate the permittivities of both plexiglass with 30 mm thickness and nylon with 21 mm thickness across 140-210 GHz and compared against the free-space transmission method, showing good agreement. The proposed method is suitable for permittivity characterization of low-loss materials when a wide-band plane-wave measurement is possible.

31 October 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Open access
BXBing Xue
Bing Xue
JTJuha Tuomela
Juha Tuomela
KHKatsuyuki Haneda
Katsuyuki Haneda
CIClemens Icheln
Clemens Icheln
JAJuha Ala-Laurinaho
Juha Ala-Laurinaho
This article introduces a novel approach to experimentally characterize the effective human skin permittivity at sub-terahertz (sub-THz) frequencies, specifically from $140$ to $210$ GHz, utilizing a quasi-optical measurement system. To ensure accurate measurement of the reflection coefficients of human skin, a planar, rigid, and thick low-loss dielectric reference plate is utilized to flatten the human skin surface. Then, a permittivity characterization method is proposed that considers phase correction for displacements and inclination of the reference plate due to the nonrepeatable behavior of human subjects in placing their body parts on the reference plate to flatten skin surfaces. The phase correction ensures good measurement repeatability. We show that the measured complex relative permittivity of the finger, palm, or arm of seven volunteers shows small standard deviations for repeated measurements of the same skin area of the same person. Meanwhile, we see significant permittivity variations across different skin regions of a human body and for different persons most likely due to varying conditions of layered structures of the skin and their moist levels. The proposed measurement system holds significant potential for skin permittivity characterization in sub-THz bands, facilitating in-depth studies on human-electromagnetic wave interactions based on the measured permittivity values.

9 December 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YWYipeng Wang
Yipeng Wang
KHKatsuyuki Haneda
Katsuyuki Haneda
CIClemens Icheln
Clemens Icheln
JAJuha Ala-Laurinaho
Juha Ala-Laurinaho
JTJuha Tuomela
Juha Tuomela
Xiaoming ChenXiaoming Chen
Xiaoming Chen
Under-sampled arrays exhibit low mutual coupling, alleviating heat dissipation challenges associated with active radio frequency (RF) components in integrated front-end designs. This paper presents an effective dielectric dome lens (DDL) for a uniform array with one-wavelength inter-element spacing, enabling beam scanning with reduced grating lobes, making it suitable for millimeter-wave communication systems. The shape of the DDL is optimized using the geometric optics (GO) algorithm, allowing for the reflection of grating lobes while maintaining effective main beam scanning. The DDL is then miniaturized, integrated with absorber sheets to dissipate reflected grating lobes, and equipped with matching layers to improve radiation performance. The subsequent full-wave simulation further optimizes the design, accounting for factors overlooked by the GO algorithm and finalizing the DDL structure for operating with a under-sampled array. Finally, a 3 × 8 under-sampled rectangular patch array working at 28 GHz, integrated with a cylinder DDL, is fabricated and measured to validate the design approach. The experimental results are in agreement with the simulations. With the help of the DDL, the array with one-wavelength inter-element spacing achieves a continuous, symmetrical-to-boresight beam-scanning range of 110°, with a scan loss (SL) within 3 dB. The grating lobe is consistently reduced, maintaining peak side-lobe levels more than 9 dB below the main beam. This scanning performance remains effective over a bandwidth of 2 GHz.

28 April 2025 in IEEE Transactions on Biomedical Engineering
Verified
Journal Article
Open access
PKPyry Kiviharju
Pyry Kiviharju
NHNam Ha-Van
Nam Ha-Van
LVLauri Vähä-Savo
Lauri Vähä-Savo
JTJuha Tuomela
Juha Tuomela
CIClemens Icheln
Clemens Icheln
ZTZachary D. Taylor
Zachary D. Taylor
Wireless capsule endoscopy (WCE) is the only option for non-invasive small intestine disease diagnostics. However, the small size of the capsules poses a major design challenge for engineers since multiple optical and electrical components must reside inside the capsules. This article proposes a space-saving dual-purpose component utilized in both optical image capturing and microwave wireless data transmission of a WCE capsule at the 915 MHz industrial-scientific-medical band. The optical performance is verified through ray-tracing simulations, whereas the microwave operation is demonstrated by full-wave impedance simulations and by conducting a radio link simulation and measurement with an up-scaled prototype. The results show that the proposed component can be utilized in capsule optics to achieve an acceptable imaging quality. Furthermore, the component operates as an antenna, providing adequate link gains for WCE wireless communications.

4 February 2026 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Open access
BXBing Xue
Bing Xue
FJFan Jiang
Fan Jiang
JTJuha Tuomela
Juha Tuomela
ZTZhijie Tang
Zhijie Tang
Accurate material characterization is essential for designing high-performance electronic, optical, and sensing systems, particularly at terahertz (THz) frequencies. Conventional methods often require accurate thickness knowledge, identical reference samples, or complex calibration, which are impractical for unique thin materials, e.g., soft or fragile thin films. This work introduces a self-calibrated method to characterize thin films placed between two dielectric slabs using free-space transmission and reflection measurements at THz frequencies, while eliminating the need for thickness information of either the films or slabs, thereby reducing system complexity. The approach employs a time-gating technique and provides closed-form solutions for permittivity extraction from measured coefficients. It accommodates substrates of different thicknesses, requiring only their permittivity values. Simulations and measurements over 220–330 GHz validate the method’s accuracy, demonstrating its effectiveness for THz multilayer permittivity characterization.