1 April 2022 in Materials Research Express
The rapid proliferation and intensive use of electronic devices have led to an increase in electronic pollution, such as electronic noise, electromagnetic interference (EMI), and radiofrequency interference (RFI), which cause malfunctions of electronic devices. The emergence of flexible polymer composites has a remarkable potential for electromagnetic shielding depending on their unique characteristics, such as their electrical, thermal, mechanical, and magnetic properties, which are very useful for suppressing electromagnetic noise. Graphene (G) and its composites can serve as better shielding materials against these interferences due to their lightweight and high corrosion resistance. Researchers are still grappling with the need for flexible and scalable smart composite materials to prevent radioactive pollution from electronic devices. The inclusion of next-generation graphene (G) conductive fillers loaded with polyvinyl chloride (PVC) /graphene is the subject of our current research (G). Due to the absorption-dominated shielding process, the composite has an extraordinarily low percolation threshold and a high shielding efficiency (SE) against electromagnetic interference (EMI).The distribution and dispersion patterns of graphene particles in the matrix phase were validated by SEM electron micrographs. The composite, which contains just 40% graphene by weight, has an EMI SE value of 26 dB in the frequency range of 10 to 15 GHz and is only 2 mm thick.In this case, we believe that promoting a scalable and industrially viable G/PVC composite, which is a novel and strong candidate in the burgeoning field of high-stress electromagnetic shielding applications in the future, is the best option.
24 January 2022 in Measurement Science and Technology
High-sensitivity electrical properties measurement of composite materials using an interferometric near-field microwave technique is proposed in this paper. A one-port calibration model is developed to relate the measured transmission coefficient to the local properties of the material. To represent the probe–composite sample interaction, an electrical model based on lumped elements is developed. As a demonstration, the complex permittivity and conductivity of composite materials prepared with polyvinyl chloride and different concentrations of graphene are experimentally determined at 2.45 GHz. The obtained results show that the proposed technique is sensitive for the detection of small contrasts of permittivity and conductivity in the composite material. When the graphene concentration increases from 1% to 30%, the conductivity increases from 0.0061 s m −1 to 0.056 s m −1 .
23 September 2017 in Advanced Electromagnetics
This paper describes a modified open-ended coaxial technique for microwave dielectric characterization in liquid media. A calibration model is developed to relate the measured transmission coefficient to the local properties of the sample under test. As a demonstration, the permittivity of different sodium chloride solutions is experimentally determined. Accuracies of 0.17% and 0.19% are obtained respectively for the real and imaginary parts of dielectric permittivity at 5.9 GHz.