Edoardo Raparelli

Edoardo Raparelli

Auto-generated profile, based on publicly available information

Edoardo Raparelli

Center of Excellence for Telesensing of Environment and Model Prediction of Severe events, University of LAquila, LAquila, Italy

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2021 in Atmospheric Chemistry and Physics
Verified
Journal Article
Open access
PDF file
Paolo TuccellaPaolo Tuccella
Paolo Tuccella
GPGiovanni Pitari
Giovanni Pitari
VCValentina Colaiuda
Valentina Colaiuda
EREdoardo Raparelli
Edoardo Raparelli
Gabriele CurciGabriele Curci
Gabriele Curci
Black carbon (BC), brown carbon (BrC), and soil dust are the most important radiation-absorbing aerosols (RAAs). When RAAs are deposited on the snowpack, they lower the snow albedo, causing an increase in the solar radiation absorption. The climatic impact associated with the snow darkening induced by RAAs is highly uncertain. The Intergovernmental Panel on Climate Change (IPCC) Special Report on the Ocean and Cryosphere in a Changing Climate (SROCC) attributes low and medium confidence to radiative forcing (RF) from BrC and dust in snow, respectively. Therefore, the contribution of anthropogenic sources and carbonaceous aerosols to RAA RF in snow is not clear. Moreover, the snow albedo perturbation induced by a single RAA species depends on the presence of other light-absorbing impurities contained in the snowpack. In this work, we calculated the present-day RF of RAAs in snow starting from the deposition fields from a 5-year simulation with the GEOS-Chem global chemistry and transport model. RF was estimated taking into account the presence of BC, BrC, and mineral soil dust in snow, simultaneously. Modeled BC and black carbon equivalent (BCE) mixing ratios in snow and the fraction of light absorption due to non-BC compounds (fnon-BC) were compared with worldwide observations. We showed that BC, BCE, and fnon-BC, obtained from deposition and precipitation fluxes, reproduce the regional variability and order of magnitude of the observations. Global-average all-sky total RAA-, BC-, BrC-, and dust-snow RF were 0.068, 0.033, 0.0066, and 0.012 W m−2, respectively. At a global scale, non-BC compounds accounted for 40 % of RAA-snow RF, while anthropogenic RAAs contributed to the forcing for 56 %. With regard to non-BC compounds, the largest impact of BrC has been found during summer in the Arctic (+0.13 W m−2). In the middle latitudes of Asia, the forcing from dust in spring accounted for 50 % (+0.24 W m−2) of the total RAA RF. Uncertainties in absorbing optical properties, RAA mixing ratio in snow, snow grain dimension, and snow cover fraction resulted in an overall uncertainty of −50 %/+61 %, −57 %/+183 %, −63 %/+112 %, and −49 %/+77 % in BC-, BrC-, dust-, and total RAA-snow RF, respectively. Uncertainty upper bounds of BrC and dust were about 2 and 3 times larger than the upper bounds associated with BC. Higher BrC and dust uncertainties were mainly due to the presence of multiple absorbing impurities in the snow. Our results highlight that an improvement of the representation of RAAs in snow is desirable, given the potential high efficacy of this forcing.

7 February 2023 in The Cryosphere
Verified
Journal Article
Open access
PDF file
EREdoardo Raparelli
Edoardo Raparelli
PTPaolo Tuccella
Paolo Tuccella
VCValentina Colaiuda
Valentina Colaiuda
FMFrank S. Marzano
Frank S. Marzano
Italy is a territory characterized by complex topography with the Apennines mountain range crossing the entire peninsula and its highest peaks in central Italy. Using the latter as our area of interest and the snow seasons 2018/19, 2019/20 and 2020/21, the goal of this study is to investigate the ability of a simple single-layer and a more sophisticated multi-layer snow cover numerical model to reproduce the observed snow height, snow water equivalent and snow extent in the central Apennines, using for both models the same forecast weather data as meteorological forcing. We here consider two well-known ground surface and soil models: (i) Noah LSM, an Eulerian model which simulates the snowpack as a bulk single layer, and (ii) Alpine3D, a multi-layer Lagrangian model which simulates the snowpack stratification. We adopt the Weather Research and Forecasting (WRF) model to produce the meteorological data to drive both Noah LSM and Alpine3D at a regional scale with a spatial resolution of 3 km. While Noah LSM is already online-coupled with the WRF model, we develop here a dedicated offline coupling between WRF and Alpine3D. We validate the WRF simulations of surface meteorological variables in central Italy using a dense network of automatic weather stations, obtaining correlation coefficients higher than 0.68, except for wind speed, which suffered from the model underestimation of the real elevation. The performances of both WRF–Noah and WRF–Alpine3D are evaluated by comparing simulated and measured snow height, snow height variation and snow water equivalent, provided by a quality-controlled network of automatic and manual snow stations located in the central Apennines. We find that WRF–Alpine3D can predict better than WRF–Noah the snow height and the snow water equivalent, showing a correlation coefficient with the observations of 0.9 for the former and 0.7 for the latter. Both models show similar performances in reproducing the observed daily snow height variation; nevertheless WRF–Noah is slightly better at predicting large positive variations, while WRF–Alpine3D can slightly better simulate large negative variations. Finally we investigate the abilities of the models in simulating the snow cover area fraction, and we show that WRF–Noah and WRF–Alpine3D have almost equal skills, with both models overestimating it. The equal skills are also confirmed by Jaccard and the average symmetric surface distance indices.

29 March 2025 in Journal of Geophysical Research: Atmospheres
Verified
Journal Article
Open access
Paolo TuccellaPaolo Tuccella
Paolo Tuccella
LALudovico Di Antonio
Ludovico Di Antonio
AMAndrea Di Muzio
Andrea Di Muzio
VCValentina Colaiuda
Valentina Colaiuda
RLRaffaele Lidori
Raffaele Lidori
EREdoardo Raparelli
Edoardo Raparelli
Black carbon (BC) and brown carbon (BrC) are light‐absorbing aerosols with significant climate impacts, but their absorption properties and direct radiative effect (DRE) remain uncertain. We simulated BC and BrC absorption during the intense Canadian boreal wildfires in June 2023 using an enhanced version of CHIMERE chemical and transport model. The study focused on a domain extending from North America to Eastern Europe, including the Arctic up to 85°N. The enhanced model includes an update treatment for BC absorption enhancement and a BrC aging scheme accounting for browning and blanching through oxidation. Validation against Aerosol Robotic Network and satellite data showed the model accurately reproduced aerosol optical depth (AOD) at multiple wavelengths, both near wildfire sources and during transoceanic transport to Europe. Improvements were observed in simulations of absorbing aerosol optical depth (AAOD) compared with the baseline model. Significant enhancements were achieved in capturing the spatial distribution of aerosol absorption in areas affected by wildfire emissions. For June 2023, the regional all‐sky DRE attributed to Canadian wildfires was reduced from −2.1 W/m2 in the control model to −1.9 W/m2 in the enhanced model. This corresponded to an additional warming effect of +0.2 W/m2 (+10%) due to the advanced treatment of BC and BrC absorption. These results indicate the importance of accurate aerosol absorption modeling in regional climate predictions, during large‐scale biomass burning events. They also highlight potential overestimations of cooling effects in traditional models, emphasizing the need of improved aerosol parameterization to better simulate the DRE and for evaluating the impacts of mitigation strategies.

10 March 2023 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
GPGianluca Palermo
Gianluca Palermo
EREdoardo Raparelli
Edoardo Raparelli
Paolo TuccellaPaolo Tuccella
Paolo Tuccella
MOMassimo Orlandi
Massimo Orlandi
FMFrank Silvio Marzano
Frank Silvio Marzano
This work presents a new approach for the estimation of snow extent, height and density in complex orography regions, which combines differential interferometric synthetic-aperture-radar (DInSAR) data and snowpack numerical model data through artificial neural networks (ANNs). The estimation method, subdivided into classification and estimation, is based on two artificial neural networks trained by a DInSAR response model coupled with Alpine3D snow cover numerical model outputs. Auxiliary satellite training data from satellite visible-infrared MODIS imager as well as digital elevation and land cover models are used to discriminate wet and dry snow areas. For snow cover classification the ANN-based estimation methodology is combined with fuzzy-logic and compared with a consolidated decision threshold approach using C-band SAR backscattering information. For snow height and density estimation, the proposed methodology is compared with an analytical inverse method and two model-based statistical techniques (linear regression and maximum likelihood). The validation is carried out in Central Apennines, a mountainous area in Italy with an extension of about 104 km 2 and peaks up to 2912 m, using in situ data collected between December 2018 and February 2019. Results show that the ANN-based technique has a snow cover area classification accuracy of more than 80% when compared MODIS maps. Estimation bias and root mean square error are equal to about 0.5 cm and 20 cm for snow height and to 5 kg/m 3 and 80 kg/m 3 for snow density. As expected, worse results are associated to low DInSAR coherence between two repeat passes and to snow melting periods.

3 November 2021 in EGUsphere
Verified
Preprint
Open access
PDF file
EREdoardo Raparelli
Edoardo Raparelli
PTPaolo Tuccella
Paolo Tuccella
VCValentina Colaiuda
Valentina Colaiuda
FMFrank Silvio Marzano
Frank Silvio Marzano
Italy is a territory characterized by complex topography with the Apennines mountain range crossing the entire peninsula with its highest peaks in central Italy. Using the latter as area of interest and the winter season during 2018–2019, the goal of this study is to investigate the ability of snow cover models to reproduce the observed snow height, using forecast weather data as meteorological forcing. We here consider two well-known ground surface and soil models: i) Noah LSM, a single-layer Eulerian model; ii) Alpine3D, a multi-layer Lagrangian model. We adopt the Weather Research and Forecasting (WRF) model to produce the meteorological data to drive both Noah LSM and Alpine3D at regional scale with a spatial resolution of 3 km. While Noah LSM is already online coupled with the WRF model, we develop here a dedicated offline coupling between WRF and Alpine3D LSM. We validate the WRF simulations of surface meteorological variables in central Italy using a dense network of automatic weather stations, obtaining correlation coefficients of 0.84, 0.58, 0.4, 0.77 and 0.66 for air temperature, relative humidity, wind speed, incoming shortwave radiation and daily precipitation, respectively. The performances of both WRF-Noah and WRF-Alpine3D, are evaluated by comparing simulated and measured snow heights, provided by a quality-controlled network of snow stations located in Central Apennines. We find that WRF-Noah and WRF-Alpine3D models present similar correlation coefficients equal to 0.77 and 0.71, respectively, but the WRF-Alpine3D model produces a lower bias (about 2.2 cm) compared to the WRF-Noah model (about −8.0 cm) in the snow height estimation. For the estimation of daily snow height variation WRF-Noah and WRF-Alpine3D present similar results with correlation coefficients of 0.72 and 0.71, respectively, but again WRF-Alpine3D showed a bias lower than WRF-Noah, about 0.09 cm and −0.22 cm respectively. The WRF-Noah model is slightly better than WRF-Alpine3D to reproduce the snow cover area observed with respect to the Moderate Resolution Imaging Spectroradiometer (MODIS) with the Jaccard spatial correlation index of 0.38 and 0.36 (optimal value equal 1), respectively, and Average Symmetric Surface Distance (ASSD) of 2.0 and 2.2 (optimal value equal 0), respectively, even though both models tend to overestimate it. We finally show that snow settlement rate in WRF-Alpine3D is mainly driven by densification, whereas in WRF-Noah there is also an important contribution of snow melting especially at high elevation. As a general conclusion, the snow cover extension and height in central Italy at moderate spatial resolution (3 km) are well reproduced by both WRF-Noah and WRF-Alpine3D, but with the latter exhibiting a lower bias likely due to its multi-layer more sophisticated numerical scheme.

8 May 2025 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
CAClizia Annella
Clizia Annella
EREdoardo Raparelli
Edoardo Raparelli
GVGianfranco Vulpiani
Gianfranco Vulpiani
VCVincenzo Capozzi
Vincenzo Capozzi
Elisa AdirosiElisa Adirosi
Elisa Adirosi
Mario MontopoliMario Montopoli
Mario Montopoli
Prediction of extreme precipitation with high spatial resolution on short time scales (i.e., nowcasting) is still challenging, and data-driven approaches such as artificial intelligence tools are increasingly being used. In this respect, two factors are undoubtedly important: i) the need of robust databases of temporal and spatial evolution of rain precipitation patterns to train new nowcasting routines and ii) the establishment of an exhaustive benchmark to evaluate the improvements brought by new prediction algorithms. This paper aims to contribute to the two points just mentioned by describing a novel practical-to-use radar data screening method and by analyzing the performance of nine existing radar nowcasting techniques to establish a minimum acceptable performance (MAP) level. The radar dataset used consists of 111955 frames (1.5 year of data) at 1 × 1 $km^{2}$ resolution sampled 5 min apart over Italy, a country scarcely investigated so far in terms of radar nowcasting compared to other areas, and that may be considered a climate change hot-spot. The results reveal a large variability in the performance of each tested nowcasting method, an aspect often not considered in similar studies but that evidences as the differences among the skills of various nowcasting methods can be systematically masked by the natural variability of each prediction outcome. The seasonal dependence of the nowcasting capacity is also shown and linked to the presence of orographic convective precipitation that occurs in Italy during the summer season. This last point also suggests for the future the need to implement convection-specific nowcasting modules, possibly optimized on local areas to improve the forecasting skills in case of atmospheric instability.