2 March 2026 in IEEE Transactions on Antennas and Propagation
Time-coding metasurfaces (TCM) have emerged as a promising approach for radar target feature modulation (RTFM), attracting significant attention in recent years. However, existing methods often encounter a trade-off between system complexity and modulation flexibility, with limited multidimensional control. Based on the linear discrete harmonic generation characteristics of periodic modulation TCMs, this paper establishes a grid distribution model of false targets in the range-Doppler (RD) domain. A phase-modulated reflector (PMR) system is further proposed to achieve high-degree-of-freedom joint modulation of target range and Doppler features, while maintaining system complexity comparable to that of 1-bit TCMs. The core of the system lies in periodic pseudo-random coding, which supports flexible RD feature modulation. By integrating a genetic algorithm with a suitable fitness function, the system enables customized harmonic generation, thereby redistributing real target energy over the RD grid to synthesize false target peaks at specified locations. Leveraging the multi-reflection and retro-reflection properties of corner reflectors, the system can be configured in either 1-bit or 2-bit phase modulation mode to generate symmetrically or asymmetrically distributed false targets in the RD domain, while preserving low system complexity. The proposed RTFM method is validated through both simulation and practical radar experiments, demonstrating its potential for diverse application scenarios.
6 August 2025 in IEEE Transactions on Antennas and Propagation
Harmonic manipulations play a crucial role in wireless communication, sensing, and radar systems. Metasurfaces, composed of periodic arrays of subwavelength units, provide a novel approach to harmonic manipulation with low complexity and high efficiency. However, general metasurface-based harmonic manipulations primarily utilize spatial and temporal modulation while neglecting frequency variation in controls of metasurfaces. In this work, a multi-frequency time modulation (MFTM) method for metasurfaces is proposed to redistribute the harmonic energy more flexibly. By introducing frequency variation in temporal modulation of metasurfaces, this method can precisely customize the quantity, amplitude, and location of harmonics in the frequency domain. This method introduces a new degree of freedom in metasurface control, thereby enhancing the modulation capabilities of time-modulated metasurfaces (TMMs) without compromising the effectiveness of conventional spatial or temporal modulation methods. The harmonic control mechanism presented in this work may be applied in fields such as wireless communication, radar, and optics.
31 October 2025 in IEEE Transactions on Microwave Theory and Techniques
Temporal-coded metasurface (TCM) provides a new paradigm for radar target feature modulation through dynamic electromagnetic parameter control. However, the false peaks generated by TCM modulation are limited by the sinc envelope constraint of the Fourier transform, and the regular false peaks are easily filtered out by constant false alarm rate (CFAR) detectors. This article proposes a nonuniform bipulse modulation waveform based on the TCM, and the core innovation lies in introducing a time-delay factor $\gamma $ as the core degree of freedom to construct a time-domain encoded sequence with nonuniform pulse intervals. This design breaks the periodic constraints of traditional uniform modulation from a physical perspective, enabling nonuniform distribution of echo energy in the feature space and significantly improving the randomness and flexibility of amplitude distribution of the false peaks. Microwave darkroom experiments have shown that by adjusting the time-delay factor and duty cycle, the amplitude of specific harmonic false peaks can be precisely controlled and even eliminated. Finally, CFAR detection further confirms its ability to significantly increase the number of effective false peaks, providing a new approach to breaking through the bottleneck of radar adaptive anti-interference.
21 August 2025 in IEEE Transactions on Microwave Theory and Techniques
Metasurfaces exhibit remarkable abilities to manipulate electromagnetic (EM) waves and have inspired many applications in communication and radar systems. Recent advancements in metasurface research have promoted the development of various low-cost and low-complexity methods for the modulation of radar target high-resolution range profiles (HRRPs). However, existing metasurface-based methods lack the capacity to achieve simultaneous and precise control over the quantity, positions, and intensity of scattering centers in the modulated HRRP. This article addresses the challenge and proposes a radar target HRRP modulation method utilizing multifrequency time-varying metasurfaces (MFTVMs). This method allows for precise customization of the quantity, positions, and intensity of false scattering centers in HRRPs, which enables flexible modulation of HRRPs. By incorporating frequency variation into temporal modulation, the method introduces an additional degree of freedom in metasurface control, thereby enhancing the modulation capabilities of metasurfaces without compromising the effectiveness of original modulation methods. The theoretical and experimental analyses presented in this article substantiate the validity of the method. Furthermore, the concept of introducing frequency variation into the temporal control of metasurfaces may inspire further research in harmonic manipulations and radar applications.
22 January 2026 in IEEE Transactions on Microwave Theory and Techniques
Maintaining angular stability for monostatic radar systems remains a critical challenge for planar reconfigurable metasurfaces, as their reflective properties are inherently governed by the specular reflection constraint. Here, we propose an amplitude/phase tunable dihedral corner reflector (AP-DCR) that synergizes dual orthogonally arranged planar amplitude/phase tunable metasurface (APM) with a dihedral architecture. This design, by exploiting complementary phase compensation between orthogonally arranged metasurfaces, effectively overcomes the inherent angular sensitivity of conventional metasurfaces. The proposed architecture provides a paradigm for achieving angle-stable electromagnetic (EM) manipulation in monostatic radar systems, with direct applicability to wide-angle retrodirectivity reconfigurable technology. The unit cell incorporates p-i-n diodes that enable phase switching between on/off states and amplitude adjustment between semi-on/off states through voltage control. Theoretical analysis demonstrates that the AP-DCR implements an angle-compensation mechanism through the orthogonal arrangement of two planar APMs. This configuration generates $90^{\circ }~\pm ~15^{\circ }$ phase differentials across ( $45^{\circ }~\pm ~15^{\circ }$ ) incidence angles, enabling broadband phase modulation of $180^{\circ }~\pm ~30^{\circ }$ and amplitude control beyond −10 dB throughout the X-band (8–12 GHz). The measurement results verify stable phase $180^{\circ }~\pm ~30^{\circ }$ and amplitude (−10 dB) modulation performance over 30°–60° incidence angles throughout the operational bandwidth, with maintained functionality at 10.5–12 GHz under extreme incidence conditions (15°, 75°). Close agreement between simulations and measurements validates the design efficacy. The design proposed in this article demonstrates significant application potential in monostatic radar deception and target camouflage scenarios.