3 January 2024 in IEEE Transactions on Industrial Electronics
Cross regulation of single-inductor multiple-output dc–dc converters deteriorates the dynamic and static performance, reduces the energy transfer efficiency, and even destabilizes the converter. To explore the deep reason for cross regulation in the single-inductor dual-output (SIDO) boost converter, the generation principle of the cross regulation in a nonideal SIDO boost converter with voltage mode control is analyzed. The nonlinear mathematical model and small-signal model of the converter are established, and the cross-regulation characteristics with parasitic parameters of circuit components are discussed. The dc voltage gain and transfer functions such as control-to-coupling, control-to-output, and cross-regulation impedance are derived. Furthermore, the characteristics of closed-loop cross regulation based on the voltage-mode control are analyzed by the Bode diagram. Both simulation results and experimental results verify that the cross regulation can be reduced by 14.3% when the parasitic resistor of the inductor increased by 0.1 Ω, and reduced by 14.5% and 14% when the parasitic resistor of the capacitor at output-a increased by 0.1 Ω and the output-b decreases by 0.1 Ω, respectively.
12 September 2024 in ISA Transactions
25 May 2025 in Electrical Engineering
30 January 2025 in IEEE Transactions on Industrial Electronics
Single-inductor dual-output (SIDO) buck converter has been widely applied in fields of portable electronic products and smart homes due to their advantages of small size and multiple outputs. However, cross regulation seriously deteriorates the stability of the converter. In addition, parasitic parameters of circuit components reduce the conversion efficiency of the converter and have a significant impact on cross regulation. To suppress the cross regulation and improve the conversion efficiency of the nonideal SIDO buck converter, a multiobjective optimization control strategy is proposed. Considering the parasitic parameters of circuit components, a large signal model of the converter is established, and a predictive equation is constructed based on the model predictive control theory. Furthermore, an objective function for optimizing output error is established based on weighting the output voltage error and inductor current error. Then, a method is proposed to achieve real-time correction of the state variable reference values. The power loss of the system is analyzed and weighted onto the objective function to improve the conversion efficiency. Compared with the common mode voltage-differential mode voltage control method, simulation and experimental results show that the proposed strategy provides smaller cross regulation and better dynamic performance. The conversion efficiency is improved by 6.6%.