Aquaculture wastewater contains nutrient concentrations that are problematic for discharge but too low for direct recovery, particularly in saline systems. This study evaluates a multi-step membrane distillation (MD) approach for water desalination and nutrient recovery from aquaculture wastewater. An MD model defined conditions that enable controlled ammonia partitioning in concentrate and distillate streams to achieve target nutrient ratios. Thus, a three-stage process was implemented: (i) MD concentration, water recovery, and tuned nitrogen redistribution; (ii) precipitation for phosphorus recovery; and (iii) a second MD step treating the ammonium-rich distillate from step (i) for nitrogen valorization and production of clean water. Experiments were conducted using real saline aquaculture wastewater as feed stream. Additional tests with synthetic solutions and with real freshwater aquaculture samples were performed to contextualize matrix-driven effects. The initial MD step achieved concentration factors of approximately 4, while producing a distillate with an average conductivity of <120 µS/cm, corresponding to an electrical conductivity rejection of ~99.7%, and transferring up to 86–90% of the initial nitrogen to the distillate. Although a phosphorus-enriched concentrate was obtained across all tests, struvite precipitation occurred effectively only in synthetic concentrates, while real wastewater concentrates were limited by carbonate competition. The second MD step converted the ammonium-rich distillate into an ammonium citrate solution, thus directly producing a liquid fertilizer and a reclaimed water stream. Overall, the integrated MD strategy recovered approximately 62-65% of the initial wastewater volume as clean, desalinated water while enabling nitrogen valorization; phosphorus recovery remained constrained by real-matrix chemistry..