The desire to obtain accurate location-based services has increased with the use of mobile devices. In this study, a visible light based indoor localization method that works with both diffusing and nondiffusing lamps is proposed. The received power from the light emitting diodes (LEDs) is used as sensor input, and an extended Kalman filter (EKF) is used for state estimation. The algorithm relies on knowledge of the expected power distribution in the room. The proposed method is robust to low SNR, nonuniform power distributions, and intermittent measurements. The results show that a tracking error around 1 centimeter can be achieved.
Indoor target tracking has garnered interest as communication systems and mobile device capabilities advance. Visible light communication (VLC) is an alternative to RF methods that uses light emitting diodes. In this paper, probabilistic filtering algorithms (particle and extended Kalman filters) are used for indoor tracking. The performance of the filters is compared with an another positioning method: trilateration. Probabilistic filtering methods are shown to be more reliable than trilateration for indoor tracking when non-line-of-sight components are significant. The probabilistic filtering algorithms require a light intensity map that is collected as a fingerprint map prior to tracking. The effect of unpredictable shadowing as the conditions change is examined in a scenario where one of the lamps has been shadowed. Our algorithm tracks the user equipment with less error than trilateration. The results also show that the tracking accuracy for our algorithms is on the order of the grid resolution of the fingerprint map for high signal-to-noise ratio environments.
The advent of location-based services has created a necessity for indoor positioning and tracking. We propose an automated fingerprinting-based algorithm for an indoor tracking system that uses light-emitting diodes (LED) equipped with imaging sensors. The fingerprint collection part requires a calibration step that consists of the following: (i) a theoretic light power distribution is calculated using the visible light communication channel model; (ii) the imaging sensors mounted on the LED arrays capture the grayscale images; (iii) the captured images and the theoretically calculated light power distribution are used to estimate the light power map. Linear and non-linear regression, and artificial neural networks are used for mapping from the grayscale pixel values to the light power levels. A photodetector on the user equipment measures the light power in real-time. The estimated fingerprint map and the real-time power measurements are used in an extended Kalman filter. The results show that we can reach an accuracy on the order of the degree of granularity of the fingerprint map.
Tracking of user equipment in indoor areas is becoming ubiquitous with the development of location-based services. The use of an RF received signal strength map in wireless positioning systems, a so-called site survey, is a well- studied technique. In this paper, we propose a hybrid method that combines the trilateration technique used in Wi-Fi and an extended Kalman filtering for visible light with crowdsourced measurements to create a received light-signal strength map. How to efficiently create such a site survey is an open challenge. Our aim is to offer a solution to this problem that is able to automate the map creation step using data sourced from the users. The results show that the proposed method outperforms Wi-Fi-only based trilateration methods. The accuracy of the proposed method is around 5 cm when the resolution of the fingerprint map is 1 dm.