Influence of nitriding time on microstructure and properties of AlN nitriding layer formed on 2024 aluminum alloy by plasma-enhanced nitriding have been investigated. Nitriding process can be divided into three stages of incubation period, growth period and stable period. AlN nodules and islands were formed on the surface of aluminum alloy in incubation period. A continuous nitriding layer was formed and the nitrding layer was continuing growth with the increase of nitriding time in growth period. There is little effect on the growth of nitriding layer by prolong the nitriding time in stable period. The incubation time is calculated and the optimized nitriding time in this study is about three hours. The related mechanism is also discussed.
Fe-based alloy coatings with different Mo contents were fabricated on 45 steel substrates by laser cladding. X-ray diffractometer (XRD), scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) were used to analyze the phase composition and microstructural evolution of the coatings. The effects of Mo addition on the wear and electrochemical behaviors of the coatings were analyzed by ball-on-disc wear tester and electrochemical workstation. The results showed that the addition of Mo could help refine grains and promote the transition of dendrites to equiaxed grains. With the increase of Mo content, the hard phases changed from Fe2B to Mo2FeB2. Mo and Cr tended to aggregate in the intercrystalline regions in the form of hard phases. When the Mo content was 4.8 wt%, the hardness increased by 3.6 times compared with that of the substrate. The wear resistance of the coatings increased with the Mo addition. Mo played the role of fine grain strengthening and solid solution strengthening, which was beneficial for the improvement of the hardness and wear resistance. Polarization curves and electrochemical impedance spectroscopy test results revealed that the addition of Mo could improve the corrosion resistance of Fe-based coating.