6 March 2019 in Journal of the Optical Society of America B
We present a system-oriented model to simulate the dynamics of transverse modes in vertical-external-cavity surface-emitting lasers. An analytical expression for the gain as a function of carrier density and temperature is derived from a simulation of the full-structure reflectivity, while the field propagation in the cavity is computed with a generalized Huygens–Fresnel integral. The laser rate equations are employed to calculate the field and gain dynamics until a steady state is reached. The optimal cavity mode size for highest output power and brightness is extracted for two of the most commonly employed pump beam shapes. The effect of pump power and output coupler on the steady-state solution and mode size optimum are discussed.
12 March 2014 in Optics Letters
We present a study of an actively stabilized optically pumped semiconductor laser operating single frequency at a wavelength of 1015 nm. In free running operation, the laser exhibits a single frequency output power of 15 W with a linewidth of 995 kHz for a sampling time of 1 s. The intensity and the frequency of the laser were independently stabilized to reach a laser linewidth of only 4 kHz for the same sampling time. To identify and reduce the different sources of noise, the relative intensity noise and frequency noise spectral density are investigated under various conditions.
12 January 2017 in Journal of the Optical Society of America B
The passive mode locking of vertical external cavity surface emitting lasers (VECSELs) enables the generation of high brightness ultrashort pulses at high repetition rates with unmatched performance. The peak power achievable with sub-200-fs pulse duration is mostly limited by the stability of the fundamental mode-locking regime as side pulses or harmonic mode locking emerges at high pump power. Here, we study a colliding pulse mode-locked VECSEL generating a pulse duration as short as 128 fs, with an average power of 90 mW per beam and a repetition rate of 3.27 GHz. The relevant laser parameters under different pumping regimes before and after the emergence of a side pulse are then used as input parameters for the simulation of the pulse interactions in the saturable absorber. We present a new comprehensive model for the calculation of saturable losses in the saturable absorber mirror and we study the energy transfer between the two counter-propagating pulses. This study reveals how a colliding pulse scheme reduces the saturation fluence of the absorber by a factor 2.9 and suppresses the mode competition between the two counterpropagating pulses of the ring cavity.
1 April 2019 in Optics Letters
We demonstrate a carrier-envelope offset-free frequency comb in the mid-wavelength infrared (MWIR) based on a passively mode-locked vertical external cavity surface emitting laser (VECSEL) operating at a 1.6 GHz repetition rate. The 290 mW output spanning 3.0–3.5 μm is generated through difference frequency generation (DFG) in periodically poled lithium niobate. The VECSEL pulse train is centered at 1030 nm and amplified up to 11 W in a Yb fiber amplifier system. The output is split to generate a second pulse train at 1560 nm through nonlinear broadening in a waveguide followed by amplification in an Er gain fiber. DFG between the 1030 and 1560 nm pulse trains results in a coherent and offset-free MWIR frequency comb, verified with optical heterodyne beat note measurements. Active stabilization of the VECSEL repetition rate provides a fully stabilized high repetition rate frequency comb in the MWIR, uniquely suited for applications in molecular spectroscopy.