Bromocresol purple was polymerized electrochemically at a carbon nanotube modified glassy carbon electrode and platinum nanoparticles were doped on the polymer film by electrochemical reduction. The modified electrodes were characterized by electrochemical impedance spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The oxidation of hydrazine was investigated at the platinum nanoparticle modified electrode in phosphate buffer. The results were compared with those obtained using other modified and bare electrodes. The best catalytic activity was obtained at the platinum nanoparticle modified electrode due to shift of the oxidation peak to more negative values and highest current. The peak potential and current for hydrazine were −445 mV and 175.5 µA, respectively. Linear calibration curves for hydrazine were obtained from 10 to 1000 mM. The limits of detection and quantitation for hydrazine were 1.0 and 3.0 mM, respectively.
Ammonia borane is widely used in most areas including fuel cell applications. The present paper describes electrochemical behavior of ammonia borane in alkaline media on the poly(p-aminophenol) film modified with Au and Ag bimetallic nanoparticles. The glassy carbon electrode was firstly covered with polymeric film electrochemically and then, Au, Ag, and Au–Ag nanoparticles were deposited on the polymeric film, respectively. The surface morphology and chemical composition of these electrodes were examined by scanning electron microscopy, transmission electron microscopy, electrochemical impedance spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. It was found that alloyed Au–Ag bimetallic nanoparticles are formed. Electrochemical measurements indicate that the developed electrode modified by Au–Ag bimetallic nanoparticles exhibit the highest electrocatalytic activity for ammonia borane oxidation in alkaline media. The rotating disk electrode voltammetry demonstrates that the developed electrode can catalyze almost six-electron oxidation pathway of ammonia borane. Our results may be attractive for anode materials of ammonia borane fuel cells under alkaline conditions.