25 January 2023 in IEEE Transactions on Mobile Computing
RFID (Radio Frequency Identification) computing devices in practical applications often suffer from their poor computing performance in terms of low task throughput (also known as task rate) due to scarce harvested power. For optimizing the task throughput, the basic idea is to choose an optimal processor clock frequency when executing a specific task ( $e.g.$ , operate sensor) in order to maximize task execution rate. Existing methods are based on the common sense where the frequency and task throughput are directly proportional to each other, meaning that a higher frequency causes a higher task rate. In RFID-scale devices, however, we observe that the relationship between the frequency and task throughput overturns the common sense, in which if the device rises the frequency, the task throughput will increase first and then decrease due to intermittent task execution pattern on such devices. In this paper, we present a systematic task throughput model to explain and formulate the non-monotonic relationship between the frequency and task throughput. Based on the throughput model, we further introduce dynamic optimal frequency scaling (DOFS) to calculate the optimal frequency for task execution and thus optimize the task throughput in the RFID-scale devices. The experimental results show that the task throughput can be improved by 45.8% on average compared to the existing best effort.
22 August 2023 in IEEE Transactions on Dependable and Secure Computing
USB flash drives are widely employed for data storage including sensitive personal or business data. Current defense strategies to protect those data mainly focus on preventing data theft when a USB drive plugs into a host computer that is infected with malware. This paper reveals a threat - attackers can produce spy USB flash drives that are able to leak the stored data via covert wireless communication without triggering security defenses on host computers. In this paper, we present SpyUSB , a USB flash drive implanted with a backscatter-based data theft hardware to demonstrate the threat of covert data theft. SpyUSB collects data from the physical layer of the communication between the host computer and SpyUSB device, which is transparent to the security mechanisms on the host computer. SpyUSB leverages backscatter communication to create a covert wireless channel. Furthermore, we explore the opportunity of covert data theft when the SpyUSB device is disconnected from the host computer using a tiny energy reservoir. Our experiment shows that SpyUSB can achieve a transmission bandwidth of up to 1,600 kbps. After unplugged from a computer, it can maintain standby for over 6 hours or continuously transmit data for 1.9 hours.
23 March 2026 in IEEE Transactions on Mobile Computing
RF energy harvesting devices operate intermittently due to the dynamic nature of harvested energy. To prevent power outages and ensure reliability, intermittency control needs to track the harvested voltage signals and adjusting the system states (e.g., active or sleep) accordingly. However, tracking the harvested energy involves power-starving operations such as using analog-to-digital converter (ADC) and micro-controller (MCU) to sample to the harvested voltage. In this paper, we propose a novel approach to address this problem by shifting energy tracking from the device to the gateway side. The gateway uses ultra-low power backscatter communication to remotely sense the power harvesting state of the device, and then opportunistically controls device's system states via downlink transmission. The key challenge is that many RF-powered devices like RFID tags already utilize backscatter communication for their existing communication needs. Sensing the energy state via backscatter could lead to collisions with ongoing communications. To address this challenge, we enable the gateway to use existing backscatter communication for energy sensing. We leverage a physical channel attenuation model for backscatter communication, allowing the gateway to infer the power harvesting state of the device using signal strength information from the gateway's transmission and reception. We also leverage the backscatter reply to build the multipath profile that calibrates the power harvesting estimation in multipath-rich scenarios. We instantiate our approach in a commercial RFID system and demonstrate significant improvements of power efficiency.