15 March 2024 in Journal of Mass Spectrometry
Mass spectrometry imaging (MSI) is an analytical technique that enables the simultaneous detection of hundreds to thousands of chemical species while retaining their spatial information; usually, MSI is applied to biological tissues. Combining these elements can create ion images, which allows for the identification and localization of multiple chemical species within the sample. Being able to produce molecular images of biological tissues has already impacted the study of health and disease; however, the next logical step is being able to combine MSI with quantitative mass spectrometry methods to both quantify and determine the localization of disease progression or drug action. In this tutorial, we will detail the main factors to consider when designing a qMSI experiment and highlight the methods that have been developed to overcome these added complexities, specifically for those newer to the field of MSI.
25 April 2023 in Journal of the American Society for Mass Spectrometry
28 July 2022 in Journal of Mass Spectrometry
In mass spectrometry imaging (MSI) applications of infrared matrix‐assisted laser desorption electrospray ionization (IR‐MALDESI), an exogenous ice layer is the gold standard for an energy‐absorbing matrix. However, the formation of the ice matrix requires additional time and instrument hardware, so glycerol was investigated herein as an alternative to the ice matrix to potentially improve spatial resolution and ionization, while decreasing experiment time. Glycerol solutions of varying concentrations were sprayed over top of rat liver tissue sections for analysis by IR‐MALDESI and compared to the typical ice matrix condition. Additionally, we tested if combining the ice matrix and glycerol matrix would further improve analyses. Matrix conditions were evaluated by comparing ion abundance of six lipid species, the laser ablation spot diameter, and number of METASPACE annotations. The ion abundances were also normalized to the volume of tissue ablated to correct for lower abundance values due to less ablated tissue. It was observed that utilizing a 50% glycerol matrix without ice provides improved spatial resolution with lipid abundances and annotations comparable to the ice matrix standard, while decreasing the time required to complete an IR‐MALDESI tissue imaging experiment.
4 December 2022 in Journal of Mass Spectrometry
Mass spectrometry imaging (MSI) data visualization relies on heatmaps to show the spatial distribution and measured abundances of molecules within a sample. Nonuniform color gradients such as jet are still commonly used to visualize MSI data, increasing the probability of data misinterpretation and false conclusions. Also, the use of nonuniform color gradients and the combination of hues used in common colormaps make it challenging for people with color vision deficiencies (CVDs) to visualize and accurately interpret data. Here we present best practices for choosing a colormap to accurately display MSI data, improve readability, and accommodate all CVDs. We also provide other resources on the misuse of color in the scientific field and resources on scientifically derived colormaps presented herein.
8 March 2024 in Rapid Communications in Mass Spectrometry
Rationale: Mass spectrometry imaging (MSI) elevates the power of conventional mass spectrometry (MS) to multidimensional space, elucidating both chemical composition and localization. However, the field lacks any robust quality control (QC) and/or system suitability testing (SST) protocols to monitor inconsistencies during data acquisition, both of which are integral to ensure the validity of experimental results. To satisfy this demand in the community, we propose an adaptable QC/SST approach with five analyte options amendable to various ionization MSI platforms (e.g., desorption electrospray ionization, matrix‐assisted laser desorption/ionization [MALDI], MALDI‐2, and infrared matrix‐assisted laser desorption electrospray ionization [IR‐MALDESI]). Methods: A novel QC mix was sprayed across glass slides to collect QC/SST regions‐of‐interest (ROIs). Data were collected under optimal conditions and on a compromised instrument to construct and refine the principal component analysis (PCA) model in R. Metrics, including mass measurement accuracy and spectral accuracy, were evaluated, yielding an individual suitability score for each compound. The average of these scores is utilized to inform if troubleshooting is necessary. Results: The PCA‐based SST model was applied to data collected when the instrument was compromised. The resultant SST scores were used to determine a statistically significant threshold, which was defined as 0.93 for IR‐MALDESI‐MSI analyses. This minimizes the type‐I error rate, where the QC/SST would report the platform to be in working condition when cleaning is actually necessary. Further, data scored after a partial cleaning demonstrate the importance of QC and frequent full instrument cleaning. Conclusions: This study is the starting point for addressing an important issue and will undergo future development to improve the efficiency of the protocol. Ultimately, this work is the first of its kind and proposes this approach as a proof of concept to develop and implement universal QC/SST protocols for a variety of MSI platforms.
18 September 2024 in Journal of Mass Spectrometry
Infrared matrix‐assisted laser desorption electrospray ionization (IR‐MALDESI) uses an infrared laser to desorb neutral biomolecules with postionization via ESI at atmospheric pressure. The Gaussian profile of the laser with conventional optics results in the heating of adjacent nonablated tissue due to the energy profile being circular. A diffractive optical element (DOE) was incorporated into the optical train to correct for this disadvantage. The DOE produces a top‐hat beam profile and square ablation spots, which have uniform energy distributions. Although beneficial to mass spectrometry imaging (MSI), it is unknown how the DOE affects the ability to perform quantitative MSI (qMSI). In this work, we evaluate the performance of the DOE optical train against our conventional optics to define the potential advantages of the top‐hat beam profile. Absolute quantification of glutathione (GSH) was achieved by normalizing the analyte of interest to homoglutathione (hGSH), spotting a dilution series of stable isotope labeled glutathione (SIL‐GSH), and analyzing by IR‐MALDESI MSI with either the conventional optical train or with the DOE incorporated. Statistical comparison indicates that there was no significant difference between the quantification of GSH by the two optical trains as evidenced by similar calibration curves. Results support that both optical trains can be used for qMSI without a change in the ability to carry out absolute quantification but providing the benefits of the top‐hat optical train (i.e., flat energy profile and square ablation spots)—for future qMSI studies.