5 February 2024 in Journal of Lightwave Technology
Microwave frequency-hopping signal generation is one of the backbone components in modern wireless communication system. In this paper, we propose a novel photoelectric integrated approach to implement broadband microwave frequency-hopping signal generation. The coherent dual optical combs are constituted by two Mach Zehnder modulators (MZMs) and one acousto-optic frequency modulator (AOM). By using dense wavelength division multiplexing (DWDM) and single-sideband modulation with carrier suppression, the proposed method extends the input signal's frequency hopping bandwidth by six times. Due to the photoelectric hybrid structure, the proposed method can achieve precise control for using electronic technology while also providing the advantages of high bandwidth and reconfigurability through photonics. In the experiment, the frequencies of generated signals can hop ranging from 0 to 6GHz. Meanwhile, the frequency hopping signals can maintain a well signal quality with the EVM lower than 6.4%.
6 March 2017 in Laser and Particle Beams
Laser-induced damage threshold (LIDT) is an important parameter used to describe the resistance of optical thin films to laser damage. The service life and cost of optical systems depend on the LIDT of the film. Thus, the precision with which the film's LIDT can be measured impacts how well the service life and cost of the system can be predicted. Therefore, it is important to find a precise approach to diagnose a film's laser-induced damage. In this paper, characteristics of the peak sound pressure of laser-induced plasma shock waves from thin films have been systematically investigated experimentally. We found that the peak sound pressure decays rapidly with propagation distance during air transmission. Based on a theoretical analysis of the relationship between the peak sound pressure and the laser damage to a film, we propose a method for diagnosing laser damage using the peak sound pressure of a thin film's shock wave. Our results show that this method can simplify implementation, which will provide a new method with which to diagnose laser damage to thin films.