1 October 2019 in Journal of Industrial and Engineering Chemistry
17 September 2020 in Advanced Energy and Sustainability Research
Recently, the perovskite solar cell (PSC) has gained increasing attention because of its remarkable surge in power conversion efficiency (PCE), up to 25.2%, over the past several years. Unfortunately, most of the efficient PSCs contain lead (Pb), a toxic metal which is an occupational and environmental hazard. Exposure to Pb is extremely common and can lead to significant detrimental neuropsychological and physical effects in humans. Tin (Sn) is also listed as a hazardous metal and causes issues, similar to those raised by Pb, regarding environment and human health. Moreover, the perovskite itself degrades into hazardous compounds under external stimuli. Solar technology is growing at an exponential speed, and the research into its environmental impacts are, therefore, becoming gradually important. Herein, a comprehensive account of recent literature on the environmental and human health effects of Pb and Sn exposure, and the sources and routes of their toxicities during processing, fabrication, application, degradation, and withdrawal or recycling of halide perovskites and their solar devices is provided. In addition, the future perspectives on nontoxic and stable perovskites for sustainable solar devices are discussed.
1 February 2021 in ECS Journal of Solid State Science and Technology
The conventional iodine-based (I−/I3 −) electrolyte used in dye-sensitized solar cells (DSSCs) presents several limitations, such as ∼30% absorption of visible light in the wavelength range of 300–500 nm and a large potential difference between the Fermi level of I−/I3 − and the HOMO level of the dye. This has a negative impact on the characteristics of DSSC such as transparency and open circuit voltage (Voc). In the present work, a series of transparent electrolytes are prepared using various additives such as I2, LiI, guanidine thiocyanate/guanidine nitrate (GuSCN/GuNO3), and Br2 to obtain highly transparent and high voltage DSSCs. The results demonstrate that the usage of the optimized electrolyte consisting of 0.003 M Br2, 0.01 M LiI, and 0.1 M GuNO3, with the binary redox couple (I−, Br−)/(I3 −, I2Br−), contributes to an ∼25% increase in transmittance compared to that of the conventional electrolyte, while the concentration of I3 − is significantly reduced. Furthermore, the downward shift in the Fermi level of the binary redox system is shown to provide an ∼100 mV enhancement in the Voc of the DSSC compared with that of the conventional electrolyte based DSSC. In addition, the devices with the optimized binary redox system achieve a power conversion efficiency of ∼7.94% which is closely comparable to the performance of conventional (I−/I3 −) electrolyte-based DSSCs. Thus, the present study could provide immense insights toward the fabrication of high-voltage and transparent DSSCs for the application in transparent photovoltaic windows. Furthermore, by using a binary redox electrolyte, the DSSCs that operative under a 2000 lux compact fluorescent lamp (CFL) were also successfully fabricated and yielded a promising efficiency of 23.6%.
1 March 2020 in Journal of Electroanalytical Chemistry
1 July 2012 in Journal of Nanoscience and Nanotechnology
Using a doctor-blade method, a highly viscous titanium dioxide (Tio2) paste was deposited on a glass substrate coated with fluorine doped tin oxide (FTO). The paste was mainly composed of commercially available Tio2 nanoparticles (P25) and hydroxypropyl cellulose (HPC) as organic filler. Varying the content of HPC in the Tio2 paste changed the physical properties of the mesoporous Tio2 layer, particularly its porosity and surface area. From the quantification of dyes on Tio2 layer and the electrochemical impedance spectroscopy (EIS) study of the dye-sensitized solar cells (DSSCs), the surface area of the Tio2 film was found to have decreased. This came with the increase of HPC content while the porosity of the film increased, consistent with the concurrent decrease of short-circuit current density (J sc) and efficiency (μ). The increased porosity greatly affected the electron transport through the Tio2 film by decreasing the coordination number of the Tio2 particles resulting to a decrease of the electron diffusion coefficient.
28 August 2010 in Journal of the Korean Electrochemical Society