25 January 2023 in IEEE Transactions on Microwave Theory and Techniques
A highly reconfigurable and switchable patch coupler is presented with controllability of the operating frequency, power-dividing ratio, and switching coupling direction for millimeter-wave applications. A patch coupler is loaded with varactors at the two sides edges and an array of five p-i-n diodes in the middle of the patch to realize this unique property. Varying the capacitance across two sides of the patch enables varying the electrical length and tuning the frequency. The array of p-i-n diodes in the middle of the patch controls the size of the common region, providing power-division ratio controllability. Based on the investigation of the developed lumped-element models, the design requirements and physical parameters to achieve the envisaged reconfigurability are defined. For experimental/demonstration purposes, a prototype is fabricated and characterized. It demonstrates a tunable operating frequency of the five sections from 22 to 30.5 GHz, a controllable power-dividing ratio between output ports from $-$ 21 to 25 dB with a loss of 1.5 dB, and a switchable operational direction between ports. The capabilities to control the power-dividing ratio and frequency simultaneously allow high reconfigurability to be achieved.
1 January 2018 in Progress in Electromagnetics Research C
Partially dielectric-filled empty substrate integrated waveguide (PFESIW) is introduced for millimeter-wave application alongside partially dielectric-filled ESIW filter by using inverter and resonators technique. The new design presents good transition implementation in order to introduce a waveguide compatible with planar integrated circuits. The main goal of introducing the new transmission line PFESIW is to control characteristic impedance without changing the cutoff frequency. The presented transmission line is analyzed by calculating attenuation constant α, phase constant β and characteristic impedance Z. The PFESIW is used to build a resonator with high-quality factor. The filter based on the combination of of ESIW and PFESIW is proposed. Furthermore, the designed filter showed very good performance in terms of bandwidth and cost. Transmission line and filter prototypes are manufactured using standard printed circuit board fabrication. Partially dielectric-filled ESIW measurement displays very good results in terms of phase constant β, attenuation constant α, return loss (S 11) and insertion loss (S 21). Measured return loss (S 11) and insertion loss (S 21) for waveguide and filter agree very well with simulation.
25 October 2019 in International Journal of RF and Microwave Computer-Aided Engineering
In this work, a single coupled cavity has presented for millimeter‐wave applications. The cavity is modeled to study the effect on the quality factor by adding cylindrical posts to coupled cavity resonator. This cavity model demonstrates a higher quality factor result and better performance compare to empty substrate integrated waveguide (ESIW) filter. The concept of enhancing the quality factor by adding posts is achieved. Based on this concept, the coupled cavity and bandpass filter are presented to show the feasibility of the fabrication process for building an ESIW filter where cylindrical posts is placed in middle on the planar substrate. The introduced cavity offers very good performance around (1%) fractal bandwidth at 24.7 GHz center frequency with Q‐factor of 2236. A cavity prototype is fabricated and measured where measurements agree well with simulation.
14 June 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
A Substrate-integrated waveguide (SIW) coupler whose coupling ratio is controllable at millimeter-wave frequency is presented. To realize this unique property, the SIW coupler is loaded with a tunable liquid crystal (LC) in the central region. To increase, translate and shift the tuning range of the LC to the required permittivity, an artificial dielectric slab is introduced and validated. A new approach to locally increase the permittivity of the LC is presented, wherein the relative permittivity is increased over the desired band. Initially, the variation in the relative permittivity of the LC is 2.46 to 3.5; the slab offers an increment in the variation, from 8.82 to 14.7. Varying the permittivity of the slab in the central region enables coupling ratio control. Based on the investigation of the proposed model, the design requirements and physical parameters to achieve a wide range of reconfigurability are obtained at the millimeter-wave band. For experimental/demonstration purposes, two reconfigurable coupler prototypes with angles of 15°and 55°between the arms are fabricated and characterized. The results demonstrate a tunable operating frequency to a certain extend with a controllable coupling ratio between output ports from 0.5 to 15 dB. These results show very good agreement with the values determined via simulation.