3 February 2023 in IEEE Transactions on Antennas and Propagation
A novel approach for dual-polarized Liquid Crystal (LC) unit cell design is introduced, allowing significant thickness reduction of a LC layer without compromising its loss and phase shift. For each unit cell, LC is used for a tunable superstrate between a cross patch above and a square patch below. The square and cross patches are coupled through two slots for each polarization. By changing the voltage applied to the square and cross patches, the LC in-between varies the resonant frequency and phase of the unit cell to realize 2D beam steering. 10×10 dual-polarized reflectarray (RA) with 30 μm (0.0028 λ) and 4 μm (3.73×10 -4 λ) thick LC layers are simulated in the 28 GHz band, where the aperture efficiencies (AE) are 25.3% and 22.5%, respectively. As a proof of concept, the dual-polarized RA with 30 μm thick LC is fabricated manually and measured at 28.5 GHz. A measurement technique is proposed to obtain the phase curves of the RA and reduce the effect of fabrication errors. With the imperfect manual fabrication, the RA still achieves the measured realized gain of 14.6 dBi corresponding to 12.5% AE. Besides, ±45° beam steering is demonstrated in the 2D plane for both polarizations.
4 February 2022 in IEEE Transactions on Antennas and Propagation
As a reconfigurable intelligent surface (RIS) is expected to be implemented with a large aperture in terms of wavelengths, using a RIS to perform near-field rather than conventional far-field communications might gain some benefits. The electric fields in the near-field region from the near-field focusing and conventional far-field RISs are simulated and compared to assess and validate the benefits. Two metrics of benefit distance and near-field gain are defined to characterize the electric fields in the near-field region. The cumulative distribution function (CDF) related to the near-field gain is calculated to describe the benefits in the area of interest where the total scan patterns from the near-field focusing and conventional far-field RISs are plotted. For demonstration, the benefit distance, near-field gain, and CDFs are presented and calculated for near-field focusing RISs with assigned focal distances of 80 and 300mm. It is concluded that the benefit distance is a critical factor affecting the CDF directly. The effects of the size of a RIS and phase quantization of elements on the benefit distance, near-field gain, and CDF are also discussed. Moreover, the maximum focal distance of a near-field focusing RIS with a certain size is derived and specified. Finally, the electric fields of three prototypes (e.g., conventional far-field RIS, near-field focusing RISs with assigned focal distances of 500 and 1500mm.) at 26GHz are measured and compared, where the benefit distances and near-field gains are experimentally observed.
31 July 2024 in IEEE Transactions on Antennas and Propagation
This communication introduces an electronically reconfigurable filtering reflectarray antenna (RFRA) with good frequency selectivity and wide beam-scanning angle. The proposed reconfigurable element consists of a metal ring loading two PIN diodes at the ring openings, a patch with a complementary split ring, an E-shaped patch, a ground plate, and the DC biasing network for PIN diodes, which can not only convert the y-polarized incident wave into the x-polarized reflected wave, but also offer a 1-bit reflection phase. Furthermore, the proposed element can generate two controllable conversion zeros to permit high-selectivity filtering performance and adjustable bandwidth. A RFRA with 40 × 40 elements is analyzed in detail to demonstrate the filtering and beam-scanning capabilities, whose realized gain can reach 26.4 dBi at 29 GHz with an aperture efficiency (AE) of 15.7% and beam scanning angle can reach 60°. For lab-level verification, a 10 × 10 RFRA prototype has been fabricated and measured. The measurement and simulation results align well with each other, demonstrating that the proposed RFRA has good frequency selectivity and wide beam-scanning capabilities.
20 July 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
This paper introduces a generalized phase compensation method to enhance gain, 1-dB gain bandwidth of transmitarrays considering oblique incidences. This method is based on studying the transmission phase of each element in the holistic framework of a transmitarray, where all oblique incidences to each element are included. As a result, the actual transmission phase of every element at different spatial positions involving oblique incidence effects can be obtained, which is leveraged to improve the performance of transmitarrays. The proposed method is especially efficient for transmitarrays with discrete phase states. For proof of the concept, dielectric lenses with a 2-bit phase quantization are configured to demonstrate performance enhancement. The simulated results show that the gain enhancement of 1.67 dB, 3.41 dB, and 4.5 dB at 26 GHz can be achieved when the focal length-to-diameter ratio (F/D) is 0.37, 0.24, and 0.14, respectively, which are experimentally verified by the measured results.
13 August 2024 in IEEE Transactions on Antennas and Propagation
Beam manipulation is of paramount importance in wave engineering, enabling diverse beam shapes like pencil beams, flat-top beams, and isoflux beams to cater to various application missions. Among the beams, shaping flat-top and isoflux beams remains challenging with the traditional synthesis approaches that mainly rely on optimization algorithms. Here, we develop transmitarrays to efficiently generate flat-top and isoflux beams from the first principle of field superposition with negligible optimizations, by performing phase symmetry operations. The theoretical analysis not only facilitates the shaping of flat-top and isoflux beams but also exhibits controllable beamwidths. Two prototypes using four-layer double-ring unit cells are fabricated and measured from 27-29 GHz. Experimental validation confirms the efficacy of the phase symmetry operations in generating flat-top beams with adjustable beamwidths. The concept of phase symmetry operations can be extended to other vectorial or scalar components, offering potential applications for the manipulation of various waves such as acoustic waves, water surface waves, and beyond, thereby advancing related applications.