1 September 2001 in Journal of Engineering Mechanics
Experimental procedures for the determination of physical properties of viscoelastic materials are discussed in this paper. Two well-known methods—a standard ASTM method and the other based on indirect measures—are compared to the method proposed here that uses direct measures of forces and response in terms of displacements or accelerations. Two kinds of materials were tested using these three methods; some conclusions, stressing the advantages of the suggested methodology, are presented at the end of the paper.
26 October 2021 in Structural Engineering International
In this paper is proposed a set of empirical equations for parameters and initial conditions of a damped bipedal model with compliant legs. The parameters of the bipedal model are estimated by fitting numerical and experimental walking forces. Sixteen volunteers are recruited to participate in experimental tests to walk on a prototype footbridge. The vertical ground reaction forces (GRFs) induced by pedestrians are recorded by force plates and the accelerations of the structure are recorded by accelerometers. Multiple simulations within certain ranges of input parameters are performed to identify the best matches between the model’s predictions and experimentally measured GRFs. Based on empirical data, regression equations are proposed as functions of pedestrian’s mass, height, and walking speed. To validate the proposed equations, the experimental tests are simulated, and the predicted structure dynamic responses are compared to measured vibrations on the footbridge. To generate a more realistic pedestrian loading, the gait speed of each step is randomized within a range to reproduce the step-by-step variations. The results of this study validate the suitability of a set of parameters selected for the bipedal model, for use in predicting loads induced by humans and estimating the vibration response of pedestrian structures.
1 November 1996 in Mechanical Systems and Signal Processing
18 January 2022 in Journal of Offshore Mechanics and Arctic Engineering
In the development of oil and gas fields, subsea pipes are used in various applications, like pipelines and risers. During operation, risers can be subjected to accidents, such as collisions with other risers, anchors, rocks, or any heavy equipment or objects, which may lead to mechanical damages. These mechanical damages are commonly characterized as dents. The objective of this work is to study the effect of the introduction of plain dents on the fatigue life of rigid risers under fully reversed bending with the conduction of resonant bending tests. A three-dimensional finite element model was developed to estimate the stress concentration on dented risers under bending. Numerical simulations and experimental tests were carried out to evaluate the resulting stress concentration factors (SCFs). These SCFs can be used in the prediction of the remaining fatigue life of dented rigid risers.