This research employs a detailed chemical mechanism to investigate the spraying of hydrogen and ammonia through dual-channel injector nozzles in a compression ignition engine.This method allows n-heptane, as the diesel primary reference fuel, and hydrogen/ammonia, as carbon-neutral fumigants, to be directly injected into the combustion chamber. The main objective is to predict how substituting a portion of the primary carbon-based fuel with these synthetic fuels affects engine performance and exhaust emissions. Numerical analysis is conducted to evaluate the impact of combustion parameters variation for each simulated fuel condition. One key finding is that optimal combustion timing for both ammonia and hydrogen enables the system to operate normally while achieving substantial emission reductions with no loss in performance. Results indicate that carbon monoxide emissions decrease by 86.7 % with hydrogen injection and 92.5 % with ammonia injection, while CO₂ output is reduced by approximately 18.2 % for both hydrogen and ammonia blends with the primary fuel. The study also investigates the Soot-NOx trade-off, revealing significant insights into emission control strategies. Furthermore, the carcinogenic emissions of hydrogen cyanide and formaldehyde are assessed, showing substantial reductions when utilizing the dual-channel spray system compared to the base engine.
28 June 2022 in International Journal of Engine Research
This study investigates a direct injection (DI) engine fueled with compressed natural gas (CNG) enrichment with hydrogen blend (HCNG) in counter from the conversion of the port injection gasoline engine. The intention of the investigation was to examine the performance and exhaust gases from the effect of excess air ratio and timing angle changes in consequence of hydrogen increment to natural gas in comparison to gasoline engine performance and exhaust gases as a single fuel. The compression ratio was set at 14:1 with varying load at 3000 rpm, and the ignition timing was applied at −17, −19, −21, and −34°bTDC at WOT, and the amount of hydrogen enrichment to natural gas was applied at 10%, 20%, 30%, and 40%. The conditions on torque, power, heat release rate, brake specific fuel consumption, CO, and NOx were studied. Results showed that the power and torque increased by 8% with increasing the hydrogen content to 40% in fuel composition and advancing ignition timing and heat release rate as well as decreasing λ from 1.4 to 1.2 relative to the stoichiometric state. Also, the specific fuel consumption decreased by 18.5% in the optimal condition.
13 May 2025 in Case Studies in Thermal Engineering