Han Xiao

Han Xiao

Auto-generated profile, based on publicly available information

Han Xiao

Beijing Jiaotong University

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 November 2018 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YDYue Dong
Yue Dong
Shiying XiaoShiying Xiao
Shiying Xiao
BEILEI WUBEILEI WU
BEILEI WU
HXHan Xiao
Han Xiao
SJShuisheng Jian
Shuisheng Jian
A novel D-shaped fiber structure combined with a fiber Bragg grating for refractive index (RI) and temperature sensing is proposed and experimentally investigated. Thanks to the etched cladding of D-shaped fiber, the resulting interference is strongly influenced by the surrounding refractive index. By monitoring the dip wavelength of D-shaped fiber structure, the refractive index can be measured. Theoretical analysis and simulations were conducted to investigate the cladding mode propagating behavior influenced by the surrounding RI. Combined with the temperature sensing property of fiber Bragg grating (FBG), the possibility of simultaneously measuring the RI and temperature relies on monitoring the resonance dip of the D-shaped fiber modal interferometer and the Bragg wavelength of the FBG. Experimental results showed that RI sensitivity of -31.79 nm/RIU within the range of 1.333 ~ 1.428, and temperature sensitivity of 28.7 pm/°C can be obtained. The proposed sensor with simple configuration, low cost and easy fabrication is suitable for refractive index and temperature sensing applications.

3 May 2017 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
YDYue Dong
Yue Dong
Shiying XiaoShiying Xiao
Shiying Xiao
HXHan Xiao
Han Xiao
JLJingxuan Liu
Jingxuan Liu
CSChunran Sun
Chunran Sun
SJShuisheng Jian
Shuisheng Jian
A novel coreless-D-shape-coreless(CDC) fiber structure for liquid level sensing is proposed and experimentally investigated. The D-shape fiber with cladding partially etched is sensitive to the ambient refractive index change, the CDC structure transmission dip wavelength shifts related to the length of D-shape fiber immersed in the liquid, so liquid level is measured by monitoring the dip wavelength. The sensitivities for three different liquids with the RIs of 1.333, 1.355 and 1.377 are 191.89pm/mm, 208.11pm/mm and 213.80pm/mm respectively. The temperature influence is also studied. The sensor exhibits a low temperature cross-sensitivity of -0.128mm/℃. The proposed modal interferometer based on D-shape fiber with high sensitivity, low cost and easy fabrication is suitable to liquid level sensing applications.

11 July 2019 in Journal of Optics
Verified
Journal Article
Closed access
PDF file
HXHan Xiao
Han Xiao
Haisu LiHaisu Li
Haisu Li
BWBeilei Wu
Beilei Wu
YDYue Dong
Yue Dong
SXShiying Xiao
Shiying Xiao
SJShuisheng Jian
Shuisheng Jian
Polarization-maintaining terahertz (THz) fibers have been considered as fundamental elements in polarization sensitive THz systems. Based on the anti-resonant waveguiding mechanism, we propose a low-loss polarization-maintaining hollow-core THz fiber with four half-elliptical cladding membranes. Numerical simulations indicate that birefringence of the fundamental mode group could be introduced by modifying the thickness of a pair of membranes while sacrificing available low-loss bandwidth. We observe that the core size, the dimension and shape of cladding membranes, have significant impacts on modal properties. For the half-circular membranes based fiber with optimized parameters, the attenuation coefficients of fundamental modes are below 10 dB m −1 , the birefringence is above 10 −4 and the group velocity dispersion values are lower than 60 ps THz −1 m −1 within the frequency bandwidths of 0.46–0.6 THz and 0.74–1.1 THz. At 0.9 THz, the lowest attenuation coefficient is 0.5 dB m −1 with birefringence of 1.52 × 10 −4 . Moreover, this THz fiber is insensitive to neither x - nor y -direction bend with a bend radius no less than 2 cm.

17 September 2018 in Optics Express
Verified
Journal Article
Closed access
PDF file
Haisu LiHaisu Li
Haisu Li
SAShaghik Atakaramians
Shaghik Atakaramians
JYJin Yuan
Jin Yuan
HXHan Xiao
Han Xiao
WWWei Wang
Wei Wang
ZHZhen Han
Zhen Han
Terahertz (THz) polarization-maintaining waveguides, which have been considered fundamental elements in polarization-sensitive THz systems, are promising platforms in developing functional THz devices. Here, we propose a THz grating based on a subwavelength rectangular polymer waveguide, which filters two polarization states simultaneously. The proposed gratings are characterized and discussed using numerical simulations. We observe two transmission dips with over a 20.9 dB extinction ratio (ER) and around a 21.1 GHz full-width half-maximum (FWHM), where the reflective frequencies of the two polarization waves and the separation between them can be harnessed with appropriate structure designs. Furthermore, we demonstrate that the grating can operate as a polarization-maintaining narrow bandpass filter (ER>12.3 dB and FWHM<1.7 GHz) by introducing a π-phase shift. This work has the potential to open a new avenue for steering polarized THz radiation using the waveguide-based filters, which could be integrated in THz polarization-sensitive imaging, sensing, and wireless communication systems.

29 September 2017 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
YDYue Dong
Yue Dong
GRGuobin Ren
Guobin Ren
HXHan Xiao
Han Xiao
YGYixiao Gao
Yixiao Gao
Haisu LiHaisu Li
Haisu Li
SJShuisheng Jian
Shuisheng Jian
We propose a novel M-shaped single mode fiber (M-SMF) sensor based on stimulated Brillouin scattering of higher-order acoustic modes for simultaneous temperature and strain measurement. Numerical investigation of longitudinal acoustic modes in the M-SMF shows that multi-peak Brillouin spectrum in M-SMF is contributed by the couplings between the LP 01 optical mode and multiple acoustic modes. The Brillouin characteristics in the M-SMF are compared with those of standard single mode fiber. Utilizing the multi-peak feature of Brillouin gain spectrum, sensing characteristics of the M-SMF under different temperature and strain conditions were studied. Thanks to the widely spaced L 01 and L 02 acoustic mode peaks in the Brillouin spectrum of M-SMF, the proposed fiber enables discriminative sensing of temperature and strain at an accuracy of 0.47 °C and 12.3 με, respectively.

30 June 2017 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
HXHan Xiao
Han Xiao
Haisu LiHaisu Li
Haisu Li
GRGuobin Ren
Guobin Ren
YDYue Dong
Yue Dong
Shiying XiaoShiying Xiao
Shiying Xiao
SJShuisheng Jian
Shuisheng Jian
We propose a novel polarization-maintaining supermode fiber containing quasi-elliptically arranged high-index cores. Numerical simulation indicates such fiber could support up to 20 distinct modes with different polarization states and spatial orientations. At 1550 nm, all the 20 modes are separated from their adjacent modes with effective refractive differences beyond 10−⁴. We also investigate the influence of parameters on mode number and effective area of the proposed fiber. Wavelength dependent performance is analyzed subsequently ranging from 1500 nm to 1630 nm. The proposed fiber could guide 20 modes with low dispersion over the entire C-band. This work illustrates that the proposed fiber might be a promising candidate for mode division multiplexing to enhance optical transmission capacity.