20 March 2006 in IEEE Transactions on Computers
Massively parallel computing systems are being built with thousands of nodes. The interconnection network plays a key role for the performance of such systems. However, the high number of components significantly increases the probability of failure. Additionally, failures in the interconnection network may isolate a large fraction of the machine. It is therefore critical to provide an efficient fault-tolerant mechanism to keep the system running, even in the presence of faults. This paper presents a new fault-tolerant routing methodology that does not degrade performance in the absence of faults and tolerates a reasonably large number of faults without disabling any healthy node. In order to avoid faults, for some source-destination pairs, packets are first sent to an intermediate node and then from this node to the destination node. Fully adaptive routing is used along both subpaths. The methodology assumes a static fault model and the use of a checkpoint/restart mechanism. However, there are scenarios where the faults cannot be avoided solely by using an intermediate node. Thus, we also provide some extensions to the methodology. Specifically, we propose disabling adaptive routing and/or using misrouting on a per-packet basis. We also propose the use of more than one intermediate node for some paths. The proposed fault-tolerant routing methodology is extensively evaluated in terms of fault tolerance, complexity, and performance.
1 August 2005 in IEEE Transactions on Parallel and Distributed Systems
Multiprocessor interconnection networks may reach congestion with high traffic loads, which prevents reaching the wished performance. Unfortunately, many of the mechanisms proposed in the literature for congestion control either suffer from a lack of robustness, being unable to work properly with different traffic patterns or message lengths, or detect congestion relying on global information that wastes some network bandwidth. This paper presents a family of mechanisms to avoid network congestion in wormhole networks. All of them need only local information, applying message throttling when it is required. The proposed mechanisms use different strategies to detect network congestion and also apply different corrective actions. The mechanisms are evaluated and compared for several network loads and topologies, noticeably improving network performance with high loads but without penalizing network behavior for low and medium traffic rates, where no congestion control is required.
21 March 2009 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
An efficient routing algorithm is important for large on-chip networks [network-on-chip (NoC)] to provide the required communication performance to applications. Implementing NoC using table-based switches provide many advantages, including possibility of changing routing algorithms and fault tolerance, due to the option of table reconfigurations. However, table-based switches have been considered unsuitable for NoCs due to their perceived high area and power consumption. In this paper, we describe the region-based routing (RBR) mechanism which groups destinations into network regions allowing an efficient implementation with logic blocks. RBR can also be viewed as a mechanism to reduce the number of entries in routing tables. RBR is general and can be used in conjunction with any adaptive routing algorithm. In particular, we have evaluated the proposed scheme in conjunction with a general routing algorithm, namely segment-based routing (SR) and an application specific routing algorithm (APSRA) using regular and irregular mesh topologies. Our study shows that the number of entries in the table is significantly reduced, especially for large networks. Evaluation results show that RBR requires only four regions to support several routing algorithms in a 2-D mesh with no performance degradation. Considering link failures, our results indicate that RBR combined with SR is able to tolerate up to 7 link failures in an 8times8 mesh. RBR also reduces area and power dissipation of an equivalent table-based implementation by factors of 8 and 10, respectively. Moreover, the degradation in performance of the network is insignificant when using APSRA combined with RBR.