28 March 2016 in International Journal of Mining, Reclamation and Environment
Based on extensive experience in shield support design and the results of underground measurements and observations, the major factors influencing the stability of the roof in retreat longwall panels were determined. A practical method for assessing the risk of roof falls is presented. It is a combination of empirical methods and expert techniques that enable investigators to determine the probability and potential consequences of roof falls. This report includes an example of applying the method to one longwall panel. The method is a practical decision tool to support the mining management when planning the roof fall preventive measures.
6 November 2023 in Archives of Mining Sciences
This article focuses on the difficulties in ensuring longwall stability resulting from the wrong geometric form of the structure of powered support sections. The authors proved, based on the in-situ measurements and numerical calculations, that proper cooperation of the support with the rock mass requires correct determination of the support point for the hydraulic legs along the length of the canopy (ratio), as well as the inclination of the shield support of the section of the powered roof support. The lack of these two fundamental elements may lead to roof drops that directly impact the production results and safety of the people working underground. Another matter arising from the incorrect geometric form of the construction are the values of forces created in the node connecting the canopy with the caving shield, which can make a major contribution to limit the practical range of the operational height of the powered roof support (due to interaction of powered support with rockmass) in terms of the operating range offered by the manufacturer of the powered support. The operating of the powered roof support in some height ranges may hinder, or even in certain cases prevent, the operator of powered support, moving the shields and placing them with the proper geometry (ensuring parallelism between the canopy and the floor bases of the section).
1 March 2017 in Archives of Mining Sciences
The problem of cooperation of powered roof support with the floor in the aspect of shaping its design is presented. From the analysis of the simplifying assumptions considered so far in the methods for determination of roof support’s base pressure on the floor, it results that they are not satisfied in the case of bases of the catamaran type, commonly used in currently manufactured roof supports. Model of cooperation of the base lying on the floor, prepared by the finite elements method is described and the results of computer simulation of the base action on the floor are given. Considering the results of numerical analyses, the factors influencing the pressure distribution of the base on the floor as well as its maximal value, have been identified.
1 December 2016 in Archives of Mining Sciences
Results of experimental tests aiming at determination of base pressure on the floor, carried out within “Geosoft” project, are presented. The tests included stand tests carried out with use of unique measuring instrumentation and special hydraulic cushion as well as tests of load of roof support set to load in operating longwall panel. The measurement results confirmed the necessity to consider the 3D model of cooperation of base and floor. Factors having impact on distribution of base pressure on the floor and its maximal value were identified, taking into account the test results.