29 December 2025 in Small
Traditional radio frequency (RF) electronics rely on discrete devices, such as diodes, transistors, capacitors, and antennas capable of operating in the GHz frequency domain. Unfortunately, integrating these components to realize large‐area RF electronics presents formidable challenges. Herein, we demonstrate wafer‐scale, solution‐processed indium‐gallium‐zinc‐oxide (IGZO) Schottky diodes with a cut‐off frequency exceeding 160 GHz. The diodes feature planar asymmetric self‐aligned nanogap electrodes patterned via adhesion lithography (a‐Lith) and a flash lamp annealed solution‐processed IGZO as the semiconducting layer. An enabling feature of the devices is the Ohmic contact facilitated by an ultra‐thin (10 nm) ZnO layer deposited atop the aluminum electrode without increasing the manufacturing complexity. The ZnO interlayer shifts the work function of the aluminum electrode closer to the conduction band of IGZO, reducing the injection barrier and improving electron injection. The ensuing diodes show reduced turn‐on voltage (≈0.08 V), higher on‐current, high rectification ratio (≈10 5 ), and ultra‐low junction capacitance (<15 pF). RF rectifier circuits made of these IGZO diodes yield a maximum output DC voltage of 0.74 V with an extrinsic cut‐off frequency exceeding 160 GHz, making them the fastest large‐area diodes reported to date. Our technology offers scalable manufacturing with unprecedented performance and creates new opportunities for emerging applications.
21 April 2026 in Advanced Materials
As advancements in artificial intelligence, the Internet of Things (IoT), and telecommunication technologies continue to accelerate, the demand for cheaper radiofrequency (RF) electronics increases. However, developing devices that meet the stringent manufacturing and performance criteria for RF applications remains a significant challenge. Here, we demonstrate organic polymeric RF Schottky diodes and rectifier circuits that can operate up to 18.5 GHz, making them the fastest organic devices reported to date. The diodes feature the molecularly n‐doped polymer, namely N2200, deposited atop self‐aligned coplanar asymmetric nanogap electrodes (sub‐20‐nm nanogaps). The coplanar architecture reduces parasitic capacitances, while the engineered electron‐injecting contacts, in synergy with the n‐doped polymer, help decrease the contact resistance and boost the device's overall performance. The polymer Schottky diodes exhibit a low turn‐on voltage of ≈0.15 V, a high current rectification ratio exceeding 10 5 , and an ultra‐low capacitance of ≈2 pF. RF rectifier circuits featuring the polymer Schottky diodes yield a maximum output voltage ( V PEAK ) of 1.43 V and an extrinsic cut‐off frequency of up to 18.5 GHz. The scalable manufacturing and unprecedented frequency response make these organic Schottky diodes a good candidate for applications in emerging RF electronics for wearables and the broader IoT device ecosystem.
10 July 2026 in Advanced Functional Materials
Tandem solar cells offer an approach to overcoming the Shockley–Queisser limit inherent to single‐junction solar devices. Perovskite‐based triple‐junction cells, particularly the perovskite‐perovskite‐organic (PPO) configuration, offer a balance of high theoretical power conversion efficiency (PCE), processability, and reduced manufacturing complexity. However, their PCE is often limited by the front wide‐bandgap perovskite sub‐cell due to halide segregation, non‐radiative recombination, and poor interfacial quality between stacked layers. Herein, we report the development of triple‐junction PPO solar cells that overcome these limitations, offering improved performance. We show that incorporating rubidium (Rb + ) ions into the A‐site of the wide‐bandgap Cs 0.40 FA 0.60 Pb(I 0.40 Br 0.60 ) 3 perovskite induces lattice distortion, suppressing halide segregation and reducing mobile‐ion concentration. The ensuing cells show an open‐circuit voltage (
V
OC
) of 1.46 V, which is among the highest reported values for ultra‐wide‐bandgap PSCs. For the mid‐bandgap perovskite sub‐cell, urea addition promotes grain growth, resulting in a denser film that prevents crack formation during deposition atop the wide‐bandgap front sub‐cell. By combining the two perovskite sub‐cells with an organic bulk‐heterojunction sub‐cell, and guided by optical simulations, we developed triple‐junction tandem devices with record
V
OC
(3.31 V) and PCE (23.03%) for the PPO configuration. Our work underscores the role of compositional engineering in advancing perovskite‐based multi‐junction photovoltaics.