T. Matthew Evans

T. Matthew Evans

Auto-generated profile, based on publicly available information

T. Matthew Evans

Oregon State Univ

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2019 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Open access
YXYang Xiao
Yang Xiao
LLLeihang Long
Leihang Long
TET. Matthew Evans
T. Matthew Evans
HZHai Zhou
Hai Zhou
HLHanlong Liu
Hanlong Liu
ASArmin W. Stuedlein
Armin W. Stuedlein
The effect of particle shape on the strength, dilatancy, and stress-dilatancy relationship was systematically investigated through a series of drained triaxial compression tests on sands mixed with angular and rounded glass beads of different proportions (0%, 25%, 50%, 75%, and 100%). A distinct overall regularity parameter was used to define the particle shape of these mixtures, which ranged from 0.844 to 0.971. The test results showed that all of the samples at an initial relative density of 0.6 exhibited strain-softening and volume-expansion behavior. It was found that the peak-state deviatoric stress, peak-state axial strain, and peak-state friction angle at a given confining pressure decreased with increasing overall regularity. The maximum differences in the peak-state deviator stress, peak-state axial strain, peak-state friction angle, excess friction angle, and maximum dilation angle due to changes in particle shape could be as much as 0.61 MPa, 5.4%, 8.6, 1.5, and 3° at a given confining pressure of 0.4 MPa. In addition, it was found that the slope of the relationship between the peak-state friction angle and maximum dilation angle was independent of the particle shape, whereas the intercept (i.e., the critical-state friction angle) was significantly influenced by the particle shape. A stress-dilatancy equation incorporating the effect of overall regularity was proposed and provided a good estimate of the observed response accounting for the different particle shapes investigated.

1 September 2019 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
YXYang Xiao
Yang Xiao
XHXiang He
Xiang He
TET. Matthew Evans
T. Matthew Evans
ASArmin W. Stuedlein
Armin W. Stuedlein
HLHanlong Liu
Hanlong Liu
The strength properties of basalt fiber–reinforced biocemented (BFRB) sand specimens with various calcite contents and fiber contents are investigated through a series of unconfined compressive and splitting tensile tests. Reverse injection is introduced to improve the uniformity of the calcium carbonate precipitation. The test results show that both the unconfined compressive strength (UCS) and splitting tensile strength (STS) at a given basalt fiber content increase significantly with increasing calcite content, whereas the axial strain of the peak failure state decreases with increasing calcite content. The improved ductility has implications for loading conditions where large deformations may be anticipated. The UCS, STS, and peak failure state strain increase with increasing fiber content at a given calcite content, which is interpreted to be due to the interlocking, reinforcing, and bonding effects observed in scanning electron microscopy (SEM) images. A phase-volume framework for determining the porosity of BFRB sand is developed and used within an existing empirical formulation developed for other types of fiber-reinforced, cemented geomaterials. Moreover, the UCS and STS of the BFRB sand can be described by the existing empirical formulations incorporating the cementing factor index expressed in terms of the porosity and calcite volumetric content. Predictions based on the empirical formulations are in good agreement with the test results for the UCS and STS of the BFRB sand specimens.

1 November 2019 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
YXYang Xiao
Yang Xiao
ASArmin W. Stuedlein
Armin W. Stuedlein
JRJinyu Ran
Jinyu Ran
TET. Matthew Evans
T. Matthew Evans
LCLiang Cheng
Liang Cheng
JCJian Chu
Jian Chu
Microbially induced calcite precipitation (MICP) has attracted significant attention as a promising in situ ground reinforcement method, particularly for the improvement of existing structure foundations. Prior to its widespread application, further study is required to answer questions that seek to improve understanding of the fundamental mechanisms of cementation. This paper focuses on the influence of particle shape on the stiffness and strength of MICP-treated glass beads through a series of unconfined compression tests. The concept of combined overall regularity was used to quantitatively evaluate the particle shape of five mixtures with different proportions of rounded and angular glass beads. Increases in the combined overall regularity resulted in significant decreases in the unconfined compressive strength and secant modulus at 50% unconfined strength, particularly for specimens with greater cementation, but a slight increase in the calcite precipitation. This validates that it is the calcite-bridging formation between particle contacts that primarily contributes to the strength increase observed in MICP-treated glass beads.

1 November 2020 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
PDF file
YXYang Xiao
Yang Xiao
HCHui Chen
Hui Chen
ASArmin W. Stuedlein
Armin W. Stuedlein
TET. Matthew Evans
T. Matthew Evans
JCJian Chu
Jian Chu
HAH. M. Aboel-Naga
H. M. Aboel-Naga
The particle breakage and compressibility behavior of sands treated with microbially induced carbonate precipitation (MICP) has been investigated using oedometric compression tests. The acid washing technique was used to obtain the calcium carbonate (CaCO3 ) content and facilitate quantification of particle breakage by measurement of the particle size distribution (PSD). It was found that the compressibility was lower for specimens with a large CaCO3 content. Particle breakage increased with an increase in the stress or input work for specimens with approximately the same CaCO3 content. In addition, for a given applied stress or input work, MICP-treated specimens exhibited smaller particle breakage than untreated specimens, which shows that the MICP treatment can effectively restrain particle breakage.

1 March 2020 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
ANAshkan Nafisi
Ashkan Nafisi
BMBrina M. Montoya
Brina M. Montoya
TET. Matthew Evans
T. Matthew Evans
Microbial-induced calcium carbonate precipitation (MICP) is a bio-mediated technique that may be used to improve the strength and stiffness of soils. Various parameters affect the behavior of MICP-cemented sand, and their effects must be explored before upscaling the MICP treatment technique. The study presented herein investigates the shear response of three types of sand (Ottawa 20-30, Ottawa 50-70, and Nevada) sheared in drained triaxial compression under three effective confining pressures (10, 100, and 400 kPa) at four levels of cementation (untreated, light, moderate, and heavy). Measurements of shear wave velocity were used for process monitoring throughout biotreatment. Shear wave velocity was used as an index to represent the cementation levels. After shearing, the calcium carbonate content was measured directly. Treated specimens showed similar shear responses at a given cementation level, although the number of treatments and the mass of precipitated calcium carbonate varied widely. Bilinear and nonlinear failure envelopes are proposed based on the obtained results to estimate the shear strength of MICP-treated sand. The shear strength parameters are estimated based on the developed bilinear failure envelope. SEM images were used to visually track the evolution of cementation at different cement contents. The predominant crystal phase of precipitated calcium carbonate was visually identified to be calcite.

1 May 2022 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
PDF file
YXYang Xiao
Yang Xiao
XHXiang He
Xiang He
ASArmin W. Stuedlein
Armin W. Stuedlein
JCJian Chu
Jian Chu
TET. Matthew Evans
T. Matthew Evans
LPLeon A. van Paassen
Leon A. van Paassen
A significant pressing issue in microbially induced calcium carbonate precipitation (MICP) is the characterization of the heterogeneous growth mechanics of calcium carbonate (CaCO3 ) crystals. This study aimed to visualize the bacteria and CaCO3 distributions at the quiescent state through microfluidic chip tests where the bacterial solution (BS) and cementation solution (CS) were initially injected simultaneously from two separate microchannels and subsequently converged in a reaction microchannel. The experiments revealed that the bacterial diffusion within the CS injection area was hindered for a high concentration of calcium chloride (CaCl2 ) (e.g., 0.5 M), whereas diffusion appeared homogeneous for a low concentration of CaCl2 (0.05 M). In addition, the CaCO3 distribution along the width of the reaction microchannel was more uniform for 0.05  M CaCl2 than for 0.5  M CaCl2 . The microfluidic chip tests in this study provided kinetic observations of the MICP process that improved the understanding of the mechanics of bacterial diffusion and CaCO3 crystal growth and their variation with different concentrations of CaCl2 .