Numerical simulations of the fluid flow around a small rotating vertical axis wind turbine are performed using a time accurate Reynolds Averaged Navier Stokes (RANS) solver. A moving mesh technique is applied for the simulation of the rotating wind turbine. The RANS equations are then formulated in ALE. All computations are performed assuming 2D incompressible fully turbulent flow. Turbulence is modelled by the SST k/ω model of Menter. Blade forces and torque are obtained from the solution of the RANS equations by integrating the pressure and shear stress over the blade surface. The expected wind turbine output is determined at given rotational speeds. The resulting power coefficients are compared to that obtained by applying a multiple stream tube theory.
Numerical computations are carried out for the NREL S809 airfoil. The flow is modelled using an unsteady incompressible Reynolds Averaged Navier-Stokes solver. Two turbulence models (SST k/ω of Menter and RNG k/ε) are applied to close the RANS equations. All computations are performed assuming fully turbulent flow. The flow field is analyzed at various angles of attack from 0 to 20 degrees. Lift and drag forces are obtained from the computations by integrating the pressure and shear stress over the blade surface. The performance of the two turbulence models is compared and the influence of the free stream turbulence intensity is checked. The results confirm the satisfactory performance of the SST k/ω model of Menter for modelling turbulent flow around airfoils.