31 December 2025 in Journal of Materials Science & Technology
17 July 2026 in Applied Surface Science
12 June 2026 in SSRN Electronic Journal
The long-term stability of disposal canisters is determined by their corrosion resistance in deep geological disposal environments. This study investigates the surface stability, electrochemical behavior, and mechanical properties of wire arc additively manufactured (WAAM) Cu and Cu alloys compared to forged oxygen-free copper (OFC) in repository-relevant groundwater. Electrochemical and surface characterizations in aerobic and anaerobic groundwater conditions were correlated with nanoindentation results. Under aerobic conditions, all materials exhibited comparable corrosion behavior with predominantly uniform corrosion. In contrast, under anaerobic conditions, AM-Cu showed higher corrosion current densities than OFC, associated with heterogeneous surface reactions. In sulfide-containing environment, the corrosion current density of OFC was approximately 3.5 times lower than AM-Cu, despite the formation of a denser Cu2S layer on AM-Cu. Tafel analysis further revealed a gradual increase of current density in anodic region, indicating instability of the CuCl- derived surface film compared to the stable response of OFC. Nanoindentation results showed that AM-Cu possesses higher hardness and elastic modulus than OFC, indicating a trade-off between mechanical strengthening and electrochemical stability. These findings demonstrate that process-induced heterogeneity in AM-Cu governs corrosion film evolution and electrochemical behavior under repository-relevant environments.
8 July 2026 in SSRN Electronic Journal
Surface films formed during final annealing in non-oriented electrical steel (NOES) develop thermal stresses during cooling because of the mismatch in coefficients of thermal expansion between the film and steel substrate. These stresses induce elastic bending of the sheet, increasing core loss by 3–4%, a non-negligible rise in energy dissipation given the widespread use of NOES. Selective removal of the surface film reduces core loss and increases the curvature radius from 0.19 to 0.20 m, indicating the relaxation of film-induced bending. Mechanical analysis reveals that the surface film generates a through-thickness stress gradient in the steel substrate, producing a maximum surface stress of approximately 9.8 MPa. Micromagnetic simulations incorporating the measured bending state demonstrate that the resulting stress gradient stabilizes a higher density of 90° domain walls during magnetization reversal. Unlike the stress-free condition, these domains persist to higher magnetic fields, leading to enhanced domain interactions and reduced magnetization efficiency. These findings demonstrate that surface film-induced bending stress alters domain structure evolution and contributes to increased core loss by promoting the formation and retention of 90° domain walls. The results highlight a previously overlooked coupling between surface film mechanics and magnetic loss behavior in NOES.