9 January 2023 in IEEE Internet of Things Journal
Integrated sensing and communication (ISAC) has the advantages of efficient spectrum utilization and low hardware cost. It is promising to be implemented in the fifth-generation-advanced (5G-A) and sixth-generation (6G) mobile communication systems, having the potential to be applied in intelligent applications requiring both communication and high-accurate sensing capabilities. As the fundamental technology of ISAC, ISAC signal directly impacts the performance of sensing and communication. This article systematically reviews the literature on ISAC signals from the perspective of mobile communication systems, including ISAC signal design, ISAC signal processing, and ISAC signal optimization. We first review the ISAC signal design based on 5G, 5G-A, and 6G mobile communication systems. Then, radar signal processing methods are reviewed for ISAC signals, mainly including the channel information matrix method, spectrum lines estimator method, and super-resolution method. In terms of signal optimization, we summarize peak-to-average power ratio (PAPR) optimization, interference management, and adaptive signal optimization for ISAC signals. This article may provide the guidelines for the research of ISAC signals in 5G-A and 6G mobile communication systems.
23 May 2022 in IEEE Internet of Things Journal
Thanks to the advantages of flexible deployment and high mobility, unmanned aerial vehicles (UAVs) have been widely applied in the areas of disaster management, agricultural plant protection, environment monitoring, and so on. With the development of UAV and sensor technologies, UAV-assisted data collection for the Internet of Things (IoT) has attracted increasing attention. In this article, the scenarios and key technologies of UAV-assisted data collection are comprehensively reviewed. First, we present the system model, including the network model and the mathematical model of UAV-assisted data collection for IoT. Then, we review the key technologies, including clustering of sensors, UAV data collection mode as well as joint path planning and resource allocation. Finally, the open problems are discussed from the perspectives of efficient multiple access as well as joint sensing and data collection. This article hopefully provides some guidelines and insights for researchers in the area of UAV-assisted data collection for IoT.
17 October 2022 in IEEE Transactions on Vehicular Technology
The emerging joint sensing and communication (JSC) technology is expected to support new applications and services, such as autonomous driving and extended reality (XR), in the future wireless communication systems. Pilot (or reference) signals in wireless communications usually have good passive detection performance, strong anti-noise capability and good auto-correlation characteristics, hence they bear the potential for applying in radar sensing. In this paper, we investigate how to apply the positioning reference signal (PRS) of the 5th generation (5 G) mobile communications in radar sensing. This approach has the unique benefit of compatibility with the most advanced mobile communication system available so far. Thus, the PRS can be regarded as a sensing reference signal to simultaneously realize the functions of radar sensing, communication and positioning in a convenient manner. Firstly, we propose a PRS based radar sensing scheme and analyze its range and velocity estimation performance, based on which we propose a method that improves the accuracy of velocity estimation by using multiple frames. Furthermore, the Crámer-Rao lower bound (CRLB) of the range and velocity estimation for PRS based radar sensing and the CRLB of the range estimation for PRS based positioning are derived. Our analysis and simulation results demonstrate the feasibility and superiority of PRS over other pilot signals in radar sensing. Finally, some suggestions for the future 5G-Advanced and 6th generation (6 G) frame structure design containing the sensing reference signal are derived based on our study.
5 March 2019 in IEEE Internet of Things Journal
With emergence of Internet of Things (IoTs), wireless traffic has grown dramatically, posing severe strain on core network and backhaul bandwidth. Proactive caching in mobile edge computing systems can not only efficiently mitigate the traffic congestion and relieve burden of backhaul, but also can reduce the service latency for end devices. However, proactive caching heavily relies on the prediction accuracy of content popularity, which is typically unknown and change over time. In this work, we propose an online proactive caching scheme based on Bidirectional Deep Recurrent Neural Network (BRNN) model to predict time-series content requests and update edge caching accordingly. Specifically, on the first layer, a one-dimensional Convolution Neural Network (CNN) is devised to reduce the computational costs. Then, BRNN is employed to predict time-varying requests from users. Afterwards, a fully connected neural network (FCNN) is harnessed to learn and sample predicts from the BRNN. Finally, we conduct experiments based on real datasets, which demonstrate that the proposed approach can achieve considerably high prediction accuracy and significantly improve content hit rate of end devices.
15 August 2018 in IEEE Journal on Selected Areas in Communications
Unmanned aerial vehicles (UAVs), featured by flexible configuration, robust deployment, and line-of-sight links, has a great potential to provide ubiquitous wireless coverage and high-speed transmission. In this paper, we aim to analyze the coverage performance of UAV-assisted terrestrial cellular networks, where partially energy-harvesting-powered caching UAVs are randomly deployed in the 3-D space with a minimum and maximum altitude, i.e., H l and H h . A novel cooperative UAV clustering scheme is proposed to offload ground mobile terminals (GMTs) from ground cellular base stations to cooperative UAV clusters. A cooperative UAV cluster is developed within a cylinder with projection centered on a GMT, based on their energy states, the cached contents, and the cell loads. With tractable Poisson point process and Gamma approximation, explicit expressions for the successful transmission probabilities are obtained. A theoretical analysis reveals that the cooperative probability of a UAV and the offloading probability of a GMT have bell-shaped relation with respect to the radius of the cylinder and the cache hit probability (the matching probability of a content request and content cache). Numerical results are provided to demonstrate the impacts of the system parameters on the cooperative UAV cluster. The results also give the optimal average altitude (H l + H h /2) and altitude difference (H h -H l ) in maximizing the coverage performance with the proposed cooperative transmission scheme.